Engine
Aftermarket Assassins Can Am Maverick R Complete Charge Tube and Blow Off Valve Kit Engine Engine
Can Am Maverick R Full Charge Tube & Blow Off Valve Kit
UTV winter accessories,Same as our BOV kit, side by side refrigerator parts, but also includes the driver side charge tube.
The Maverick R does not come with a blow-off valve. Can Am relies on the large volume of the charging circuit and throttle closure to keep the engine off when the throttle is cut. It certainly works, eBay Polaris UTV Parts, Hisun UTV 500 Parts, Hisun UTV 400 Parts, but is not ideal for your turbocharger. Our BOV kit sounds awesome and helps your turbo get rid of that extra boost when you back off the throttle. This results in longer turbo life and is overall better for the turbo and engine.
Aluminum or Silicone Charge Tubes: Aluminum charge tubes are stronger with less expansion under pressure and have less air turbulence. This gives a better flow thansilicone tubes during back-to-back testing. Expanding the charge tube increases the volume of the charge circuit, eliminating air transfer to your engine and resulting in slower starting. Aluminum tubes therefore dissipate and reflect heat from the engine much better than silicone tubes. The main advantages of silicone tubing are fewer clamps (normally), cheaper to make, and sometimes easier to install. We always use/make aluminum tubes when possible, as they have proven to be better and very reliable...especially with good T-bolt hose clamps.
Our aluminum BOV is the same proven design we have used for nearly 7 years in the powersports industry and is properly tuned/suspended for your Maverick R.
NOTE: Picture also shows our catch box in closed loop AA (not included, 2003 Polaris UTV parts, las vegas UTV parts, pneus utv 6 ply, used utv parts, sold as a separate item)
- Our blow off valve is assembled in-house to ensure quality
- Includes plug for BOV port au case you need to remove the valve and run without it (like factory)
- A must have for all Maverick R, 570 utv parts, but especially when increasing boost, such as using our AA Boost control box.
- ChLarge tube with BOV port is manufactured in our own manufacturing facility in the United States
Includes:
- Valve of black anodized aluminum blow-through
- BOV filter
- BOV cap
- (2) 1" BOV hose clamps
- BOV connector hose 1"
- AA Welded/Bead Rolled Aluminum Elbow
- HD Silicone Fittings
- (2) 3" Hose Clamps
- 1/4" Silicone Hose
- Brass 1/8 "T" Fitting for Cali Models
- Driver Side Charging Tube2.25" Aluminum R
- Driver Side Charge Tube Couplers and Charge Tube Clamps
Instructions
60050 discountable, Make_Can Am, Model_Maverick R4.90 (376 reviews)
