Engine
Aftermarket Assassins Can Am X3 Oil Catch Can Engine Engine
Can Am X3 Oil Catch Can
This oil catch can is a must-have for all Honda Talon UTV X3.12 Volt parts, and especially for anyone using higher boost pressures. Â What happens is the more boost you run, the more crankcase pressure is created. Your factory crankcase vent is routed back into the intake tube. With more crankcase pressure and more suction from the turbo, oil will begin to be pulled from the bottom end and enter the intake tract. It is not good for sensors, Napa UTV parts, online parts store, Geiser UTV parts, UTV tires 16 rims, Massimo 500 UTV parts diagram, UTV junkyards, or good for burning l oil from a performance point of view. Opting for our closed loop catch box design will essentially eliminate oil entering your intake.
Features:
- Made in the USA specifically forr the X3
- The closed loop design is much better than an open filter as it keeps dirt/water out
- The closed loop design also uses the Intake suction to create a negative crank Increase pressure for better horsepower and lower crankcase pressure.
- No AN type fittings, any latch using these fittings restricts flow and will increase crankcase pressure. crankcase.
- Internal baffle to prevent oil from bouncing back.
- Mounts to the frame rail with the larger clamps provided
- Easily installs in about 10 minutes
- Drain valve to empty the waste bin recovery
Can Am Maverick X3
Installation instructions, KSL UTV parts MX17-50002 discountable, Make_Can Am, Model_X34.52 (338 reviews)
