Sale!

Aftermarket Assassins Polaris Ranger XP 1000 (2021+) Stage 4 Clutch Kit with Primary and Secondary Clutching

$185

SKU: Aftermarket Assassins Polaris Ranger XP 1000 (2021+) Stage 4 Clutch Kit with Primary and Secondary Clutching
Category:

Clutching

Aftermarket Assassins Polaris Ranger XP 1000 (2021+) Stage 4 Clutch Kit with Primary and Secondary Clutching Clutching

Polaris Ranger XP 1000 (2021+) Stage 4 Clutch Kit with Primary & Secondary

Helix 107-1065 Performance:

Aggressive Helix with acceleration/higher power/fast paced aggressive riders in mind.  Works best on Rangers equipped with 27-30 inch tires and OEM gearing or those equipped with 31-35 inch tires with under-ratio.

High Load Helix 107-1062:

p>

Slightly less aggressive than the 1043 prop with good acceleration/power transfer gains over the OEM prop.  Designed with heavier vehicle, heavier tires, Polaris UTV track parts, heavy sand load or crawl type riding in mind.  Works best on Rangers with 31-35" tires and OEM gearing. Great all-around propeller for any Ranger!

Our recoil clutch weights are easily adjustable with simple magnets. They have a custom AA profile, axle 500 utv parts manual, why are utv parts so expensive, utv edge parts, partsquality s utv, the BEST coating on the market (nitrocarburizing) that has increased wear resistance, improved fatigue resistance and additional surface lubricity. These clutch weights also offer excellent performance, Colemun 550 UTV parts and the ability to tune many different applications or modifications in the future, without the need to purchase additional parts.  Magnetic weights are the best option for properly placing mass where we need it to get the best performance for your application.

AA HD Sliders

Our excellent setup guide will help you lets you know how to set weights for different tire sizes and other variables, as well as how to check that the clutch is set up correctly.

You will need the P90X clutch puller to remove your OEM clutch. AA clutch uses clutch pullerprimary age standard workshop

  • With this clutch you will notice better power transfer (better acceleration) and lower belt temperatures than your OEM P90X clutch or any other aftermarket clutch
  • Smooth as butter engagement, pro utv parts, gets rid of the factory jerk at idle
  • We especially recommend it with our tuning as it will allow a higher RPM, which will allow you to achieve the maximum power of the Ranger 1K engine
  • A must have when using bigger tires
  • Faster acceleration
  • Poor throttle response and faster downshifts
  • Cooler running belt temperature (especially when using larger tires)
  • DLonger belt and clutch life
  • More consistent clutch performance
  • Easily adjustable if necessary
  • Helix features a tighter roller and EBS pocket for less clutch slope (slap) and less chance of roller breakage
  • Includes:

    • Primary Clutch AA
    • Primary Bolt
    • AA Magnetic Adjustable Clutch Weights
    • Weights Configuration Sheet
    • Primary Spring AA
    • Custom Primary Limiter
    • Replacement Factory Secondary Clutch
    • AA Helix
    • AA Secondary Spring
    • Primary Sliders AA Extreme Heavy Duty
    • AA HD secondary rollers (shipped installedLED in the clutch).

    DISCLAIMER: This clutch is noisier at idle because these Clutches have a loose spider/slider tolerance until engine RPM increases. This clutch is tightened under the cover et MAY lightly contact plastic at idle, causing some wear marks (extremely rare, but we have seen it due to cover variations). The main bolt has a turned down (shortened) head to fit under the cover. This is easier to strip, so be careful when tightening and make sure you use an 18mm hex socket. When disassembling the clutch, the 6 button head Allen bolts from the spring cover are also easy to remove if you use the wrong size (or standard), they are 4mm.

    NOTE: The clutch does not come assembled. Simply set up your weights according to our setup chart, then install the weights and spring.

    Vehicle Compatibility

    Polaris Ranger XP 1000 (2021+)

    NOTE: Fits all models standard and from 2021. Crew Ranger XP 1000 models with NEW Ranger XP 1000 body style. 2022+ Northstar Editions:these have a larger detentK taper, international utv parts, does not fit Ranger 61HP single cam models.

    , utv tractor parts TA012FULLSKID-PR1000XP-21-BK discountable, Make_Polaris, Model_Ranger XP !000 Vehicle Model:Polaris Ranger XP 1000 (2021) (Small Crank Taper),Polaris Ranger XP 1000 (2022+) (Small Crank Taper),Polaris Ranger XP 1000 Northstar Edition (2022+) (Large Crank Taper)|Helix:Performance Helix 1065,High Load Helix 10624.58 (407 reviews)