Clutching
Aftermarket Assassins Polaris RZR Turbo (2016-2020) Secondary Clutch Charged Clutching Clutching
Polaris RZR Turbo (2016-2020) Loaded Secondary Clutch
For those looking to replace their 2016-20 Turbo/RS1 factory secondary clutch. Available naked (without propeller or spring) or loaded with AA propeller and spring. Must already have a primary adjustable clutch if you choose loaded with an AA propeller and spring. Contact us if you need to order a primary clutch or view the appropriate S4 clutch kit for your model if a replacement primary clutch is also required.
Our custom cut propeller will give you better power to the wheels on 2017-18 models due to the slightly steeper angle. All models will benefit from a more consistent rev sweep. Factory propellers start out stiff, then become shallower at the top end. For turbo machines, it's completely backwards. We run at a right angle because changing the load on a heavy machine in the middle of a shift can cause some problems.es. Basically Polaris utv parts, ssr utv parts, 2016 propellers were too stiff and therefore had belt issues, used utv parts ebay, fimco 45 gallon utv sprayer parts, odes utv parts, 2017 propellers are A LOT shalle driveways decrease and wheel performance suffers. We've found the perfect angle to keep everything happy, with exceptional belt life and excellent performance.
Helix 1031 Performance: Aggressive Helix Holeshot. This propeller works great for the setups listed and has a more aggressive 0-25 MPH shift angle compared to the 1024 performance propeller. It's better for holes and aggressive riders who trail, dunes, races and drag races. This setup will still work well when needed, but if your driving is slower/creeper, Bmx UTV 300 Parts, Parts Realtree 24V UTV, we suggest the 1024 propeller.
- 2017- 2020 XPT and Turbo S 2 Seater: Works well with 28-32 inch tires / 28-32 inch paddles 32 in.
- XPT 2016: Only the propeller we recommend for ALL 2016 models (due to lower drivetrain) unless they are larger than 33 in tires.
- 2018+ RS1: Works well with 27-32 inch tires and is what 90% of users will want.
Helix 1024 Performance: The only difference Compared to the performance of the 1031 hElix is that the shift angle from 0 to 25 MPH is slightly less aggressive. This makes it better for crawling and in slow speed situations, but it still pulls like crazy when you have to accelerate hard. A great all-around propeller choice.
- 2017-2020 2 or 4 Seater XPT and Turbo S: Works well with 28-33 inch tires/paddles.
Helix at high loade 1021: If you are using very large/heavy tires, the high load propeller might be the choice for you. The high load propeller is recommended for those using heavy duty 32-35" tires. This angle slows the shift to help act as if it is "reducing" the secondary clutch. This helps prevent a excessive shifting and cause belt slippage in these higher load situations. If you primarily use your RZR for crawling and/or have heavier 32-35 inch tires, you may want to use this propeller. If you have a heavy 4 seat vehicle and 32 inch paddles, this would also be a good choice for you.
- 2017-2020 2 seater XPT/Turbo S: works well with 34-35" tires.
- 2017-2020XPT 4-seater: works well with 32-35" tires/32" pallets.
- 2018+ RS1: works well withtires 34 inches or larger and pallets 31 to 32 inches. The high load propeller can be used with any tire size 29" and up if you are just after belt life and performance is not your priority. The Performance Angle can still be used with larger tires and paddles if performance is what you're after, just keep in mind that belt life will be less than our high load configuration. li>
Features:
- Kits work great with stock or modified machines
- A must-have when tuning your turbo. RZR
- A must-have when using larger tires or paddles
- Huge acceleration gains
- Poor throttle response when riding presses the accelerator on and off.
- More efficient power transferred to the wheels
- Em performancemore consistent clutches
- Cooler running belt temperature (especially on larger strokes). tires or paddles!)
- Longer belt and clutch life.
- We HIGHLY recommend using our Circlip Removal Kit on 2016-2020 models .
- Loaded PN: 108-1065-B
- Polaris RZR RS1 (2018-2020)
- Polaris RZR Turbo S (2018-2020)
- Polaris RZR XP Turbo (2016-2020)
