Engine
Aftermarket Assassins Polaris RZR Turbo Billet Wastegate Kit Engine Engine
Polaris RZR Turbo Billet Wastegate Kit
ssr utv parts, used utv parts canada, camso utv track parts, utv parts phoenix az,Great replacement for your worn waste actuator. As springs age and with more operating time, they wear out. This can cause a low boost condition, resulting in less power and more heat created.
Standard wastegate kit from 5 to 11 psi is adjustable from 5.5psi to 8psi with spring and also includes an optional 7-11psi spring. This works great for those who need a little more crack pressure than can be achieved with the OEM wastegate, especially at higher altitudes.
The valve spring 5 to 8 psi discharge provided in the actuator kit allows you to easily adjust for those using our pieces that require the crack pressure to be 6.5 to 7 psi
Factory crack pressure is 5.5 psi and unlike others on the market, 9 seater UTV, 5-11 psi actuator kit can be adjusted to a true stock PSI setting so you don't Don't be too boosted when setting up your wastegate on a stock RZR.
We also have a 7-18 psi wastegate kit featuring a 7-11psi actuator spring, utv parts sydney, palace auto parts, with an optional 14-18psi spring. This should only be used for custom applications where the setting is designed for the higher pressure actuator.
Features:
- Easy to adjust crack pressure when or if needed.
- Installation is not difficult but normally takes 1-1.5 hours. This requires loosening the turbo bracket and removing the oil feed/drain line from the turbo. Â Instructions included.
- We suggestWe strongly recommend adding our Wastegate Pressure Pump to properly adjust this valve to the correct crack pressure
- If using AA tunes, check the adjustment product description as it will list pressure of proper crack needed with tunes (if not listed, parts xy300 utv, 5.5-6 psi is standard)
- Polaris RZR PRO XP
- Polaris RZR Turbo R
- Polaris RZR Turbo S
- PolaRis RZR XP Turbo
