Sale!

Agency Power Can Am X3 Cold Air Intake Kit (Dry Filter) Engine

$60

SKU: Agency Power Can Am X3 Cold Air Intake Kit (Dry Filter) Engine
Category:

Engine

Agency Power Can Am X3 Cold Air Intake Kit (Dry Filter) Engine Engine

Can Am X3 Cold Air Intake Kit (Dry Filter)

A cold air intake kit on the Can-Am Maverick X3 Turbo can greatly improve the performance of your vehicle. It is quite common for the first mods on a vehicle to be the intake, UTV parts Sydney, Coleman UTV 400 parts, exhaust, and ECU tuning. While Can-Am X3 owners make ECU adjustments almost immediately upon their first modification, the increased boost levels mean the turbo needs more air. A cold air intake is designed to circulate more air than the factory air intake. This differently designed intake from Agency Power features a high flow air filter that provides your turbocharger with more CFM when it needs it most. The factory air box is designed to fit the stock power and daily driver Can-Am wants you to be. Chances are you're thin! Unlike thestock air box or other flow tubes that simply open the stock air box, a full cold air intake is the right way to get unrestricted power. An intake should breathe while filtering particles. By removing the Donaldson air box, Realtree UTV Parts 24V you get better throttle response, East Lake UTV Parts, faster turbo spool and proven power dyno even without ECU flash. The Agency Power cold air intake was designed as a direct replacement for the factory Can-Am X3 Turbo intake. Every part of the intake has been meticulously designed to provide performance, longevity and reliability. Starting from the top, the Agency Power Custom High Flow Filter features a blue mesh design with an AP logo tip. This mesh is made up of synthetic nano-fibers. The dry filter does not need to be oiled because its media has diameters less than micron and small inter-fiber spaces which result in the capture of a greater number of contaminants. This filter is reusable allowing you to easily clean it between outings. Below the filter is a precision laser-cut aluminum plate that bolts to the factory lower air box. This one features a custom Frogzskin material that is implemented into the aluminum frame. Unlike other companies hand cutting foam which can allow particles into your engine and clutch housing, Frogzskin material is a suitable engineered solution. There are no flow restrictions to keep your clutch and intake cool! Frogzskin mesh repels water, dirt, Massimo UTV 500 Parts, Zhejiang Xinyang UTV Parts, Massimo UTV Parts Catalog, dust, etc. while allowing air to circulate freely. Frogzskin Mesh is a woven polyester material andis HYDROPHOBIC, meaning it will repel water and water splashes, but it is NOT waterproof. Eliminating the heavy and bulky Donaldson filter, the Agency Power intake then features an aluminum tube with fittings that attach directly to the compressor side of your turbocharger with the supplied AP silicone coupler. Each aluminum part is powder coated in matte black for a clean, sleek finish. Clamps are included to facilitate assembly of the kit. To show the performance of the Agency Power intake, we tested a Can-Am X3 back to back keeping all variables the same except for intake. On a car with stock tuning and just an exhaust, the intake produced a bolt-on 2 horsepower. Making a simple 2 horsepower is hard to do on any of these UTVs with parts bolted to the outside of the exhaust and ECU tuning.The most important thing is how the intake works with the ECU tuning. With the higher boost requested, the intake alone generated 8 horsepower over the stock intake. This is due to the significantly improved airflow over the storage box. The boost pressure remains more constant because the turbo is no longer starving for air. Overall, Elemara UTV Parts, Massimo 500 UTV Parts, Intake is a great product to add during your first upgrade or during your build to improve horsepower. Made entirely in the USA, the Agency Power Can-Am li>

  • Precision cut intake plate with Frogzskins
  • Black powder coated finish
  • Proven Dynolts result
  • Note:

    • The intake uses the stock air box cover.  Not shown in imageses to highlight the filter.
    • Pre-filter cover sold separately or as an option on the product.
    • Understanding Cleaning and Filtering Technology – Read Here
    VEHICLE ADJUSTMENT

    Can Am Maverick X3

    INSTALLATION

    Instructions

    13662-13697 Empty discountable, Make_Can Am, Model_X34.62 (348 reviews)