Engine
Agency Power Can Am X3 Turbo Upgrade Engine Engine
Can Am X3 Turbo Upgrade
****PLEASE READ THE "NOTE" AT THE BOTTOM BEFORE PURCHASE!!!****
The Can-Am Maverick X3 Turbo has revolutionized the 'UTV world with its performance capabilities. By adding a simple ECU flash and exhaust, these turbocharged 3-cylinder engines become monsters. But after you've done all the basic modifications, the next biggest power gain is to do a full turbo upgrade. The factory turbocharger works well in the 900cc engine, but there's a lot more to be gained from this SXS. An upgraded turbocharger will flow more air, requiring less boost pressure to gain horsepower. But when you increase that boost, be prepared for an incredible power surge! For those who want the ultimate advantage over their friends and competitors, this turbo upgrade is capable of developing 300 engine horsepower!
Agency Power has partnered with one of the leading manufacturersturbo company in North America to offer this complete bolt-on turbo upgrade for the Can-Am Maverick X3 Turbo. What makes Agency Power Turbo better than the competition is that it is a complete replacement of the original manufacturer. This is not a compressor cover, wheel modification, core swap, utv mx parts or anything else available from others. This is a complete replacement turbo that directly fits your Can-Am X3. Due to the increase in compressor housing size, we include the necessary silicone adapters for you to run the stock Donaldson airbox and connect to the stock type intercooler. Each kit includes new oil and water lines precisely adjusted to keep the turbocharger operating at maximum efficiency. Additionally, we include new studse exhaust manifold for easy installation. Made entirely in North America, the turbo features a fully cast manifold, new adjustable wastegate, larger compressor and turbine wheel, NRP UTV parts, plus an upgraded turbo housing that has been finished in red shiny with the Agency Power logo.
We tested this big turbo upgrade on a 2019 Can-Am X3 RS as well as a 2017 X3 RS model with a 2018 upgraded power kit. Both Cars had a stock clutch and only an exhaust system for a modification. Each car sat on 15-inch wheels with 32-inch tires. With a base output of 140 rear-wheel horsepower, we spent the next few months recording data, testing and proving the performance of our turbochargers. In the end, Can Am UTV Parts, Xy 500 UTV Parts, 2012 Massimo 500 UTV Parts, we got dVery impressive dyno results to show. Using 91 octane on a Mustang Dyno here in late summer in Arizona, we recorded a 60 wheel horsepower gain over stock! Calculating the drivetrain loss at around 20%, this shows that the Agency Power Big Turbo, at the fuel pump, is producing just north of 250 horsepower at the engine! All that power while still running the factory 2 bar MAP sensors and engine internals. What is the capacity of 300 horsepower at the crank? How the 2020 Can-Am
This is a true turbo upgrade in a box to install on your Can-Am Maverick X3. The way we package this kit allows you to work with any existing or new tuner you may have. The turbo allows you to keep your existing performance modifications such as factory style exhaust system, intercooler and intake. Having been designed, tested and manufactured by one of the leading OEM turbo producers, we know this turbocharger will far exceed all expectations. The turbo was designed to fit and improve the performance of 2017-2021 Can-Am Maverick X3 Turbo vehicles.
OEM replacement for Can-Am part number 420893733
Specifications :
- OEM turbo flow up to 0.15 kg/s
- AP turbo flow up to 0.20 kg/s
- The air flow is increased by 33% over stock
- Compressor wheel
- Inducer - 41mm
- Exducer - 51mm
- Turbine wheel
- Inducer- 45mm
- Exducer- 40.4mm
Features:
- Bolt-on, no modifications required to fit
- Compressor cover rpowder coated ouge with AP logo
- Made in North America
- Each turbocharger is numbered
- No core required, keep or sell your OEM turbo
- More consistent torque curve
- Less drop-off in high-end power range
- Torque stays longer
- Power gain of over 60 horsepower on pump gas with tuning and support mods
- Power gain of over 80 horsepower on racing gas with tuning and support mods
Note:
- This is for the turbocharger bolt only. This does not include tuning or other support modifications.
- Recommended parts for installation:
- Agency power intercooler or equivalent upgrade.
- Agency Power Exhaust or equivalent system.
- Agency Power Blow Off Valve or equivalent - Requires modification to store a long exhaust pipepower for a 1 inch plug or get a new BOV specific hose.
- For those using a Power agency.Cold air intake, auto palate parts, utv parts mesa az, modifications are required to continue using. Turbo includes an adapter to operate the stock Donaldson filter.
- Turbo requires larger injectors for optimal performance. The size of the injector may depend on your tuner.
- Cometic Head Gasket – required only for higher 3 bar boost applications.
- Alba Racing ARP Head Studs – required only for higher 3 bar boost applications.
- Agency Power Turbo Heat Blanket for K04 Size Turbo – Excessive heat may occur.
- Clutch – STM, Alba, DynoJet clutch weights. Not used in testing but huge difference in performance.
- AEM Wideband Security Gaugeur monitor boost and AFR - Not required, kymco utv parts, great add-on for monitoring vitals.
- Camshafts – Not required but great for low rpm power. For those already using the VR Big Cam Shaft upgrade, this is no problem.
- Can Am Maverick X3 Turbo RS DS 154 HP
- Can Am Maverick X3 Turbo RS DS RC XMR 172 HP
- Can Am Maverick p> MX3Aarm-64 discountable, Make_Can Am, Model_X34.93 (329 reviews)
