Engine
Bikeman Performance Polaris RZR Pro R High Performance Camshafts Engine Engine
Polaris RZR Pro R High Performance Camshafts
2003 Polaris UTV Parts, Axis 500 UTV Parts Manual, Lake Havasu UTV Parts, UTV Replacement Parts, Seth ATV/UTV Parts,This is the most popular performance upgrade for the Polaris Pro R RZR. Our custom cams offer the best price per horsepower. These high-performance camshafts underwent 9 revisions before being marketed. Our optimized lobe duration maximizes air and fuel entry into the engine to maximize combustion. This modification brings no additional wear to the engine and is just as safe as a stock camshaft. Other cameras available in the market do not work the same as our custom camera. you can only purchase this camera from Bikeman or one of our dealers.
Steps to start your Pro R stage 3 and above for the first time.
These steps are different from those of the service. manual. Do not follow the steps in the manual'interview
1. Turn the engine by hand for at least 10 revolutions clockwise while viewing it from the rear.
2. Check the camera timing to make sure it is correct
3. Make sure the coolant and oil are at the correct level.
4. Start the engine and keep it above 2,000 rpm until it reaches 170 degrees F.
5. Using the throttle, lower the speed by 50 rpm every 30 seconds until the idle feels choppy.
6. Stay on the unstable diet until it becomes stable, then repeat step 5.
7. Once the machine is idling at a steady 1450°C without operating the throttle, let it sit and idle for 10 to 15 minutes.
8. Your machine is now ready to roll.
9. On longer duration cams, it is common to have to apply a little throttle to start the vehicle,which is completely normal.
Specifications:- 300 hp with ECU tuning, BMP exhaust and camshafts.
- +30 hp with cams at 8,650 rpm min in stock
- Custom Cut specs (can only purchase this spec from Bikeman)
- collaboration with the most renowned 4 cylinder performance parts brand, Farr 700 utv parts, parts bighorn utv, utv parts fleet, Brian Crower
- Stock HP 230-235, parts outlet, 270 hp with our Torque Link tuning and slip on
- No additional head upgrades required
NOTES:
- Hard flash is REQUIRED with this part
- Professional installation recommended or prior motor experience
Polaris RZR Pro R
INSTALLATION, bulldog 300 utv parts 300DP0224 discountable, Make_Polaris, Model_RZR PRO R4.71 (357 reviews)
