Sale!

Evolution Powersports Can Am Maverick R High Flow Intake Kit Engine

$83

SKU: Evolution Powersports Can Am Maverick R High Flow Intake Kit Engine
Category:

Engine

Evolution Powersports Can Am Maverick R High Flow Intake Kit Engine Engine

Can Am Maverick R High Flow Intake Kit

Expand your engine's power potential with the all-new EVP High Flow Intake (HFI) kit for the Can-Am Maverick R! From EVP's experience in the off-road industry and Todd's Supercar days, Vitacci UTV Parts, Zhejiang Xinyang UTV Parts, Bighorn UTV Parts, UTV Accessories Black Friday Sale, UTV Accessories Kit , we've seen where OEM sockets are not ideal for higher performance. -than the original power. The OEM Donaldson style intake works well but is restrictive. The short intake tube from the airbox to the turbocharger does not have time to properly smooth the airflow entering the turbocharger. This results in reduced efficiency and loss of power. As engine airflow demands increase with tuning and/or exceed stock RPM limits, the more important a smooth intake becomes. The EVP HFI solves these problems by providingant up to 23 WHP* on the factory airbox at 9,000 rpm on our X85 DCT+ tune!

The EVP HFI works so well because of the filter located in the high pressure area .of the OEM intercooler duct and works with both the firewall vented intercooler duct and the OEM roof scoop. It has been tested with and fits the stock turbocharger and the soon to be available P47 turbo upgrade for the Maverick R. The filter is made in the USA specifically for Evolution Powersports by one of the best off-road air filtration names. The filter contains 2 times the filter media of the OEM filter. The integrated ram air venturi system provides smooth airflow to the turbocharger, side by side utv brands, jacksonville utv parts, increasing the efficiency of the turbocharger. Finally, the silicone connector hose is oversized and wire reinforced to maintain its forms in grueling conditions.

Features:

  • More power and faster spool turbocharger features
  • Much less restriction with 2 times Full size air filter
  • Reinforced silicone to prevent collapse
  • Integrated valve cover breather port and boostrt recirculation port
  • Includes all hardware needed for installation

Includes:

  • EVP Intake Tube
  • EVP High Flow Air Filter and pre-filter
  • Venturi and EVP brackets
  • Additional hardware

NOTE: These gains were achieved on a racing version of our tuning X85 with higher rev limits and higher shift points. The vehicle also had a full EVP exhaust system.

VEHICLE FITMENT

Can Am Maverick R

INSTALLATION

Maverick R High Flow Intake

, moab utv parts , pieces ebay polaris utv 30005GH01201 Make_Can Am, Model_Maverick R4.67 (353 reviews)