Gates Arctic Cat Wildcat XX G Force Redline Drive Belt Clutching

Clutching

Gates Arctic Cat Wildcat XX G Force Redline Drive Belt Clutching Clutching

Arctic Cat Wildcat XX G Force Redline Drive Belt

FIND YOUR REDLINE

Designed for the most demanding turbocharged off-road CVT applications. Using Gates' proprietary materials and design, G-Force RedLine™ CVT belts withstand extreme temperatures with excellent heat recovery, while maximizing load and torque capacity, making them one of the world's leading belts. most efficient CVTs on the market today.

Features:

• First on the market to use an ethylene elastomeric compound to meet the needs of larger SxS and High-power PHEV in harsh driving conditions.
• Next-generation EE compound provides maximum transverse stiffness and heat resistance, resulting in higher load capacity, side-by-side parts reno , utv atv parts near me, empire industries utv parts, higher peak torque capacity, partes odes 800cc dominator utv, bulldog utv parts, less "heat fading" and less speed loss.
• Delivers on average 75% greater dynamic axial stiffness, up to 50% loss of speed. less speed and better recovery of temperatures up to +170°C (+338°F) without loss of power.
• Unrivaled temperature capability - Runs cooler, resists glazing for better recovery and reduces cracking/splintering after operation at temperatures above +149°C (+300°F).
• Extended belt life – Increased belt life 100-300% compared to competitive aftermarket belts under harsh laboratory and field testing conditions.
• Higher Horsepower Capacity – Speed Loss (RPM) reduced by 50 % under high loads and>10% increased load capacity compared to other aftermarket belts.

  DO NOT BREAK YOUR BELT. Break it.

  If you don't break the belt correctly, you'll find yourself shredding the belt instead of the ground. In fact, most powersports belt failures can be traced to poor clutch break-in and adjustment – or no belt failure at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.

  1. Install the right belt. Using a belt that's even slightly different from OE specs can affect performance - or stop you in your tracks.

  2. Align and clean. Align the clutches according to the manufacturer's specifications and clean the pulleys with a Scotch-Brite™ pad. Remove old belt residue, Polaris UTV track parts, glazing, oils and debris with alcohol or acetone on the pulley areaclutch. DO NOT USE BRAKE CLEANER.

  3. Install it and insert it. Perform two heating cycles (10 to 15 minutes each) at +27°C (+80°F) at 30 to 40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then shut the belt off and allow it to cool for 30 minutes. Repeat the process a second time. If the belt installation is at a temperature of +16°C (+60°F) or lower, perform two heating cycles in 20 minutes at 30-40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then shut the belt off and allow it to cool for 30 minutes. Repeat the process a second time. Carefully move through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes), then turn it off and let it coolr completely for 30 minutes. Repeat process.

  VEHICLE ADJUSTMENT

  Arctic Cat Wildcat XX

  CKTWCXX-2R discountable, Make_Arctic Cat, Model_Wildcat XX4.64 (363 reviews)