Clutching
Gates Polaris RZR 900 (2015-2019) G Force Redline Drive Belt Clutching Clutching
Polaris RZR 900 (2015-2019) G Force Redline Drive Belt
FIND YOUR REDLINE
Designed for the most demanding turbocharged off-road CVT applications. Using Gates' proprietary materials and design, G-Force RedLine™ CVT belts withstand extreme temperatures with excellent heat recovery, while maximizing load and torque capacity, making them one of the world's leading belts. most efficient CVTs on the market today.
Features:
- First on the market to use an ethylene elastomeric compound to meet the needs of larger SxS and High-power PHEV in harsh driving conditions.
- Next-generation EE compound provides maximum transverse stiffness and heat resistance, resulting in higher load capacity, maximum torque capacity higher, less "heat fade" and less speed loss.
- Delivers 75% greater dynamicsevée. axial stiffness on average, Mahindra UTV parts, up to 50% lower speed losses and better recovery at temperatures up to +170°C (+338°F) without loss of power.
- Unrivaled Temperature Resistant Capability - Operates at lower temperatures, resists glazing for better recovery and reduces cracking/pulling after operation at temperatures above +149°C (+300°F).
- Extended Belt Life – Belt life increased by 100-300% over competitive aftermarket belts under harsh laboratory and field testing conditions.
- Capacity to Higher Power - 50% less speed loss (RPM) under high loads and>10% increased load capacity compared to other replacement belts.
Do not break your belt. Break it.
If you don't break the belt correctly, you willYou'll find yourself shredding the belt instead of the ground. In fact, most powersports belt failures can be traced to poor clutch break-in and adjustment – or no belt failure at all. Follow these three steps to ensure the best performance and longest life from your G-Force™ belt.
1. Install the right belt. Using a belt even slightly different from OE specifications can affect performance - or stop you in your tracks.
2. Align and clean. Align the clutches according to the manufacturer's specifications and clean the pulleys with a Scotch-Brite™ pad. Remove old belt residue, Kryptonite UTV Parts, Side by Side Parts Edmonton, Glazing, 500cc UTV Parts, Oils, Used UTV Parts Canada, UTV Parts Cleveland Ohio and debris with alcohol or acetone on the clutch pulley areaage. DO NOT USE BRAKE CLEANER.
3. Install it and insert it. Perform two heating cycles (10 to 15 minutes each) at +27°C (+80°F) at 30 to 40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then shut the belt off and allow it to cool for 30 minutes. Repeat the process a second time. If the belt installation is at a temperature of +16°C (+60°F) or lower, perform two heating cycles in 20 minutes at 30-40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then shut the belt off and allow it to cool for 30 minutes. Repeat the process a second time. CoGo carefully through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes), then turn it off and let it coolcompletely for 30 minutes. Repeat the process.
VEHICLE ASSEMBLYPolaris RZR 900 (2015-2019)
, pro utv parts 26R4140 discountable, Make_Polaris, Model_RZR 9004.70 (369 reviews)
