Clutching
Gates Polaris RZR XP 900 G Force Drive Belt Clutching Clutching
Polaris RZR XP 900 G Force Drive Belt
3D Printed UTV Parts, OFF-ROAD INNOVATION FOR EPIC ADVENTURES.Gates® G-Force™ Continuously Variable Transmission (CVT) Belts are the Ultimate, Used ATV UTV Parts, Pitster Pro 150 UTV Parts, Component high-tech technology for transfer Turn on your small recreational power sports equipment. We designed G-Force™ belts with durability, UTV chassis parts, simplicity, performance and value in mind, then tested them under harsh conditions in controlled environments. So whether you're loading up your UTV for a hard day's work or going off-road on a road less traveled, Gates recreational belt drives and power transmission solutions continue to push the boundaries of what's possible so that you can also .
Features:
Advanced materials science and technology enable:
- Insert belt* manufactured by OEMs; Proprietary measurement technology ensures exact fit (*Clutch deviation may require adjustment if necessary).
- Matches the belt change curves and speed ratios of the stock pulleys; excellent performance at a reduced cost.
- Extensive laboratory testing under severe dynamometer conditions and on field vehicles.
- Advanced trapezoidal top notch and cog design Rounded edges maximize heat dissipation and flexibility.
DO NOT BREAK YOUR BELT. BREAK IT.
If you don't break the belt properly, you'll find yourself shredding the belt instead of the ground. In fact, most powersports belt failures can be traced to improper clutch break-in and adjustment – or no belt failure at all. Followthese three steps to ensure the best performance and longest life of your G-Force™ belt.
1. Install the right belt. Using a belt, even if slightly different from the original specifications, can affect performance or stop you in your tracks.
2. Align and clean. Align the clutches according to the manufacturer's specifications and clean the pulleys with a Scotch-Brite™ pad. Remove old belt residue, hyper utv-1000 aftermarket parts, bulldog 300 utv parts, glazing, oils and debris with alcohol or acetone on the clutch pulley area. DO NOT USE BRAKE CLEANER.
3. Install it and insert it. Perform two heat cycles (10 to 15 minutes each) at 80°F at 30 to 40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then turn it off and allow it to cool for 30 minutess. Repeat the process a second time. If the belt installation is at a temperature of 60°F or lower, perform two heat cycles in 20 minutes at 30-40 mph (2WD) with the cover installed. Return the belt temperature to normal operating temperatures, then shut the belt off and allow it to cool for 30 minutes. Repeat the process a second time. Carefully move through the entire shift range, without exceeding ¾ throttle. Bring the belt back to normal operating temperature (15 minutes), then turn it off and let it cool completely for 30 minutes. Repeat the process.
VEHICLE FITTINGPolaris RZR XP 900
,xinyang utv parts 21G4140 discountable, Make_Polaris, Model_RZR XP 9004.53 (352 reviews)
