Suspension
High Lifter Can Am Defender (2020-2024) APEXX Angled Rear Control Arms Suspension Suspension
Can Am Defender (2020-2024) APEXX Rear Raked Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy duty control arms, twice as strong as your stock arms, utv replacement parts, utv bennche parts, utv parts on facebook marketplace, fleet of utv parts, with the extra ground clearance you need for any terrain and bigger tires. .
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection, UTV parts, UTV machine parts and visual appeal. Don't let yourselfDon't be fooled by too much arch which exposes your axles to a greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the top Lifter logo precisely cut into the brace.
Installation is made easy with our step-by-step, multi-picture instructions. When installing, UTV accessories manufacturers and UTV parts used UTV, you can reuse the original bushings for easy installation.
Always check the bearings, bushings and brakes before installation and replace them if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.
Integrated Adjustment
These lower arms featurent an adjustment component in the bushing collars to eliminate premature wear that can come from adding lift kits, gates or large tires. When the kit is set to the factory position, you will have 3/8" adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to have confidence in the force you add to your ride. Clamps come pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Features:
- 50% larger than average stock arms - Made from 1 1/2" x 0.120" wall thickness DOM Steel
- Up to 2.5 times the wall thickness of 'a medium stock arm
- Lubricators included for most models
- Added grounding Clearance with bends that maximize axle clearance and protection
- Mostart of powder coating colors available in stock
- Easy to install and maintain
- Limited lifetime warranty
- Heat treated adjustable collars for camber adjustment with 1 inch thread
- Can-Am Defender HD10 DPS 2020
- Can-Am 2020 Defender HD10 XT
- Can-Am Defender HD10 XTP 2020
- Can-Am Defender MAX HD10 DPS 2020
- Can-Am Defender MAX HD10 HD10 DPS 2020
- Can-Am Defender HD10 DPS 2021
- Can-Am Defender HD10 XT 2021
- Can-Am Defender HD10 XT 2021 Am Defender MAX HD10 DPS
- Can-Am Defender MAX HD10 XT 2021
- Can-Am Defender PRO HD10 DPS 2021
- Can-Am Defender HD10 DPS 2022
- Can-Am Defender HD10 XT 2022
- Can-Am Defender MAX HD10 DPS 2022
- Can-Am Defender MAX HD10 HD10 DPS
- Can-Am Defender HD10 6x6 DPS 2023
- Can-Am Defender HD106x6 XT 2023
- Can-Am Defender HD10
- Can-Am Defender PRO HD10 DPS 2023
- Can-Am Defender PRO HD10 XT 2023
- Can-Am Defender HD10 6x6 DPS 2024
- Can- Am Defender HD10 6x6 XT 2024
- Can-Am 2024 Defender HD10 DPS
- Can-Am Defender HD10
- Can-Am Defender MAX HD10 DPS
- Can-Am Defender MAX HD10 XT 2024
- Can-Am Defender PRO HD10 DPS 2024
- Can-Am Defender PRO HD10 XT 2024
