Suspension
High Lifter Can Am Defender (2020-2024) APEXX Front Offset Control Arms Suspension Suspension
Can Am Defender (2020-2024) APEXX Front Forward Offset Control Arms
All new APEXX High Lifter Control Arms are stronger, adjustable and designed for the most demanding terrain with 1.75" of additional ground clearance and 2" forward lean. Push your Can-Am Defender to the limits and tackle obstacles you couldn't overcome before! Optional pre-installed ball joints to simplify installation.
Features:
- Heat-treated adjustable collars for camber adjustment with 1-inch threads
- 2" forward tilt
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint supports to eliminate warping issues, compatible with ball joints Keller
- Ladder bar compatible with 1.5" ID clamps
- Extremely durable 1.5" x 0.120" DOM steel construction
- Up to 2" more ground clearance compared to OEM lower arm
- Mount adaptations for OEM brake lines using OEM tabs instead of P-clamps
- Optimized stabilizer bar link angles
- Limited lifetime warranty ( excludes wearable items such as bushings, bearings, cones, International UTV parts and Heim gaskets)
- Powder coated
- Custom colors available upon request. (Customer must provide paint code)
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. Our upper and lower arms are made with the same material for strength, Dragonfire UTV Parts, DLC UTV Parts and Accessories, so they can withstand the abuse applied during typical driving. The High Lifter arms are constructed from 1.5" DOM with .120 wall tubing. This is a 50% increase in size and a 70% increase in thicknesssteel for increased durability and strength.
Integrated AdjustmentThe lower arms also feature an adjustment component in the bushing collars to eliminate premature wear that can occur. from adding lift kits, Orb UTV parts, gates or larger tires. When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat-treated and plated adjustable bushing collars allow you to have confidence in the strength that you add to your ride This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized. ground clearance by strategically arching the lower control arm with double bends. This unique design allowed us to gain an additional 1.75 inches of ground clearance to avoid crashing into these vehicles.obstacle songs on the trails. These elbows maintain factory geometry, which helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint SupportsThe gates and large tires apply torque that can distort the ball joint support, leading to arm failure . With an increase of over 130% in ball joint mounting area, UTV access. When financed, we help prevent failures or "stretching" of the mounting bracket.
Mounting tires: up to 34.5" Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture andtire fitment may be affected by other modifications such as UTV hunting accessories, UTV accessories ideas, UTV accessories okc, but not limited to, side by side parts, wheel offset, actual tire diameter and actual tire width. check your tire brand, lift and other modifications before making a purchasing decision.
Optional pre-installed ball jointsHigh Lifter's service team uses a hydraulic press to install the joint ball joint with the correct pressure and alignment, which also ensures the clip is fully installed and secure. Purchasing control arms with the ball joints already installed makes installation easier and avoids damage due to improper installation, which is not covered by High Lifter's lifetime warranty. Ball joints are pre-installed.This kit contains BJC-2 and BJC-3.
VEHICLE FITMENT- Can-Am Defender HD10 DPS 2020
- Can-Am Defender HD10 XT 2020
- Can-Am Defender MAX HD10 DPS 2020
- Can-Am Defender MAX HD10 DPS 2020
- Can-Am Defender PRO HD10 XT
- Can-Am Defender HD10 6x6 XT 2021
- Can-Am Defender HD10 DPS 2021
- Can-Am Defender HD10 XT 2021
- Can-Am Defender MAX HD10 DPS 2021
- Can-Am Defender MAX HD10 PRO HD10 DPS 2021
- Can-Am Defender PRO HD10 XT 2021
- Can-Am Defender HD10 6x6 XT 2022
- Can-Am Defender HD10 DPS 2022
- Can-Am Defender HD10 2022 XT
- Can-Am Defender MAX HD10 DPS 2022
- Can-Am Defender MAX HD10 -Am Defender PRO HD10 DPS 2022
- Can-Am Defender PRO HD10 XT 2022
- Can-Am Defender HD10 6x6 DPS 2023
- Can-Am Defender HD10 6x6 XT 2023
- Can 2023 -Am Defender HD10 XT
- 2023 Can-Am DefeSous Max HD10 DPS
- Can-Am Defender MAX HD10
- Can-Am Defender PRO HD10 DPS2023
- Can-Am Defender PRO HD10 XT
- Can-Am Defender HD10 6x6 DPS 2024
- Can-Am Defender HD10 6x6 li>Can-Am Defender HD10 DPS 2024
- Can-Am Defender HD10 XT 2024
- Can-Am Defender MAX HD10 DPS 2024
- Can-Am Defender MAX HD10 XT 2024
Installation Instructions
TF041105-BK discountable, Make_Can Am, Model_Defender Ball Joints:No Ball Joints,Add Ball Joints4.82 (392 reviews)
