Sale!

High Lifter Can Am Defender 4" Portal Gear Lift 15% Dual Tensioner Drivetrain

$158

SKU: High Lifter Can Am Defender 4" Portal Gear Lift 15% Dual Tensioner Drivetrain
Category:

Drivetrain

High Lifter Can Am Defender 4" Portal Gear Lift 15% Dual Tensioner Drivetrain Drivetrain

Can Am Defender 4" Portal Gear Lift 15% Dual Idler

6 passenger utv, pro utv parts,

This High Lifter 4-inch portal gear lift is sturdy and ready to take on any challenge. Now designed with a gear configuration that allows two idler gears in the gate box to distribute the load between twice as many teeth on the gears. This doubles the surface area and cuts stress in half, allowing for more abuse. This kit is for riders looking for torque and power.

High Lift Portal Gear Lifter (Each Kit Includes 4 Portal Boxes)

15% Discounts and 30% off dual rollers

What does the Dual Idler Gear Lift offer?

  • High Lifter has improved the gate design by adding a second idler gear into the box of gears
  • The double idler gears distribute the load across twice as many teeth on the gear sets, doubling the surface area and reducing stress by half.
  • You get more reliable torque transfer
  • Stop burning belts and breaking them. so many axles; differentials; transmission shafts; norkel gears…
  • Reducing gears extends brake life by needing brakes less often thanks to greatly improved engine braking
  • Even though a lower gear ratio will bring closer your speedometer from a stock reading, this gear is still too high to compensate for the loss of torque caused by the larger tires. If you don't need to run fast, a lower gear performs better and gives you the power you want!

Why is this 4" kit better than our competitor?

Forged gearboxes

  • The strongest gearboxes on the market because forging produces a stronger piece of metal
  • The forging is stronger than cast aluminum and us aluminuminĂ©
  • Competitors use cast aluminum and machined aluminum housings
  • These gate housings are extremely sturdy and allow you to travel more worry-free miles than any what other portal

Gearbox ventilation

  • Customers have requested ventilation per box and we offer you the option
  • Our box design offers a plug for ventilation with an easy-to-install optional kit coming soon
  • Venting kits provide a cooling benefit that reduces early deterioration of gaskets and seals
  • li>

Joint material and design

  • High density Kevlar fiber gaskets and no additional sealant is required
  • The seal material is creep resistant and resistant to oil and coolant

Seals

  • Two oil seals on spindle shaft for 100% more sealing surface
  • Double seals prevent water intrusion and oil leaks
  • True triple seal on the input shaft which includes a wiper seal which provides a significant additional layer of protection

Backing plate

  • These are the strongest backing plates on the market
  • 5/16" steel plate with curved flanges for strength and durability. OK
  • Gusset brackets welded and designed to be offset at the factory
  • Works with all control arms built to factory hub specifications

Rotors

  • Precision ground stainless steel rotors (this is a big problem or braking performance)
  • Access holes for easy assembly and disassembly
  • Slotted rotor allows for heat dissipation and cooling

Gear profile

  • The heat treatment process ofAlloy steel increases overall internal and external strength
  • CNC precision ground machining ensures excellent fit and increased strength
  • Controlled break-in of gears for ease of operation installation and quieter performance

Largest tire with gate: 33"Largest tire with front arm: 35"

Our tire fitting guide shown is a general assembly and is in no way guaranteed. Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications. Always check your tire brand, lift, Massimo 700 UTV parts diagram, UTV parts financing and other modifications before making a purchasing decision.

Wheel Requirements:

  • 14" or larger
  • 14" factory wheels must have a 1" spacer.
  • 14" and 15" do not cannot exceed a rear spacing of 4-1/2"
  • 1Les models 6 inches and larger cannot exceed 5 inches backspacing.

Note: Four inch gates will ship when back in stock at the end of March.

VEHICLE FITMENT
  • 2016 Can-Am Defender HD8
  • Can-Am Defender HD10 2016
  • Can-Am Defender HD8 DPS 2016
  • Can-Am Defender HD10 DPS 2016
  • Can-Am Defender HD8 XT 2016
  • Can-Am Defender HD10 XT 2016
  • Can-Am Defender HD10 CAB 2016
  • Can-Am Defender HD10 2017
  • Can-Am Defender HD10 CAB 2017
  • Can-Am Defender HD10 DPS 2017
  • Can -Am Defender HD10>
  • Can-Am Defender HD8 XT 2017
  • Can-Am Defender HD10 2018
  • Can-Am Defender HD10 DPS 2018
  • Can-Am Defender HD10 XT 2018
  • Can-Am Defender 2018 HD10 CAB XT
  • Can-Am Defender HD8 2018
  • Can-Am Defender HD8 DPS 2018
  • Can-Am Defender HD8 XT 2018
  • Can-Am Defender HD8 CAB -Am Defender HD10 XTP 2018
  • Can-Am Defender HD10 DPS 2019
  • Can-Am Defender HD10 li>
  • Can-Am Defender HD10 XMR 2019
  • Can-Am Defender HD10 CAB 2019
  • Can-Am 2019 Defender HD8
  • Can-Am Defender HD8 DPS 2019
  • Can-Am Defender HD8 XT 2019
  • Can-Am Defender HD8 CAB 2019
  • Can-Am Defender HD10 DPS 2020
  • Can-Am Defender HD10 XT 2020
  • Can-Am Defender HD10 XTP 2020
  • Can-Am Defender HD10 XT 2020
  • Can-Am Defender HD8 2020
  • Can-Am Defender HD8 DPS 2020
  • 2020 Can-Am Defender HD8 XT
  • 2020 Can-Am Defender HD8 CAB 2020
  • Can-Am Defender HD10 DPS 2021
  • Can-Am Defender HD10 LTD CAB 2021
  • Can-Am Defender HD10 XMR 2021
  • Can-Am Defender H 2021D8
  • Can-Am Defender HD8 CAB DPS 2021
  • Can-Am Defender HD8 DPS 2021
  • Can-Am Defender HD8 XT 2021
  • Can-Am Defender HD5 2021
  • Can-Am Defender HD5 DPS 2021
INSTALLATION

Instructions

, utv parts winnipeg, farr utv parts, utv accessories kit AA-CA-DEF-BFT-001-02 discountable, Make_Can Am, Model_Defender4.77 (357 reviews)