Suspension
High Lifter Can Am Defender XMR APEXX Front Offset Control Arms Suspension Suspension
Can Am Defender XMR APEXX Front Forward Offset Control Arms
All new APEXX High Lifter Control Arms are stronger, adjustable and designed for the most demanding terrain with 1.75" of additional ground clearance and 2" forward lean. Push your machine to the limits and tackle obstacles you couldn't overcome before!
Features:
- Heat-treated adjustable collars for camber adjustment with threaded 1"
- 2" forward tilt
- Over 3 degrees of camber adjustment in each direction
- Heavy-duty ball joint supports to eliminate problems Warp, Kubota UTV Parts, Used UTV Parts Ontario, Compatible with Keller Ball Joints
- Ladder Bar Compatible with 1.5" ID Clamps
- Extremely DOM Steel Construction 1.5" x 0.120" heavy duty
- Up to 2" of added ground clearance over the stock lower arm.
- Mounting housings for flow linesstock kidney using stock tabs instead of P-clamps.
- Optimized stabilizer bar link angles
- Limited life Warranty (excludes items such as bushings, UTV accessories made in the USA, Heim bearings, cones and seals)
- Powder coated
- Custom colors available upon request. (Customer must provide paint code)
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. The High Lifter arms are constructed from 1.5" DOM with .120 wall tubing. This is a 50% increase in size and a 70% increase in l steel for increased durability and strength.
Integral adjustmentThe lower arms also feature an adjustment component in the bushing collars to eliminate premature wear that can occur. from adding lift kits, gates or larger tires. When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to have confidence in the force you add to your ride. This kit parts are packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Guard. Increased Ground Clearance We maximized ground clearance by strategically arching the lower control arm with double bends. This unique design allowed us to achieve an additional 1.75 inches of ground clearance to avoid hitting those nasty obstacles on the road. Trails These elbows maintain the factory geometry, which q.ui helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint SupportsThe gates and large tires apply torque that can distort the ball joint support, leading to arm failure . With an increase of over 130% in ball joint mounting area, UTV parts store, Polaris UTV track parts, we help prevent failures or "stretching" of the mounting bracket.
Tire Fitment: Up to 34.5" Our tire fitment guide is a general fitment and is not guaranteed in any way. Tires and risers vary by manufacturer and tire fitment may be affected by other modsfications such as, but not limited to, nearby UTV parts and accessories, wheel offset, actual tire diameter, and actual tire width. Always check your tire brand, lift and other modifications before making a purchasing decision.
Optional Pre-Installed Ball JointsHigh Lifter's service team uses a hydraulic press to install the ball joint with correct pressure and alignment, bmx utv 300 parts, utv parts suppliers, utv parts used, also making sure the clip is fully installed and secure. with the ball joints already installed, this makes installation easier and avoids damage due to improper installation, which is not covered by High Lifter's lifetime warranty.
VEHICLE COMPATIBLE- Can -Am Defender HD10 CAB 2020
- Can-Am Defender MAX HD10 CAB XT 2020
- Can-Am Defender MAX HD10 Lone Star 2020
- Can-Am Defender MAX HD10 Can-Am Defender HD10 LTD CAB 2021
- Can- Am Defender HD10 XMR
- Can-Am Defender HD8 CAB DPS 2021
- Can-Am Defender MAX HD10 Lone Star 2021
- Can-Am Defender MAX HD10 LTD 2021 CAB
- Can-Am Defender MAX HD10 XMR 2021
- Can-Am Defender HD10 Limited 2022 Can-Am Defender HD10 XMR 2022
- Can-Am Defender MAX HD10 Limited 2022
- Can-Am Defender MAX HD10 Lone Star 2022
- Can -Am Defender MAX HD10 XMR 2022
- Can-Am Defender MAX HD10 Can-Am Defender HD10 CAB DPS Limited 2023
- Can-Am Defender HD10 2023 CAB XT Limited 6x6
- Can-Am Defender HD10 XMR 2023
- Can-Am 2023 Defender HD10 XMR with doors
- Can-Am Defender MAX 2023HD10 CAB XT Limited
- Can-Am Defender MAX 2023 HD10 Lone Star
- Can-Am Defender MAX 2023 HD10 Lone Star CAB
- Can-Am Defender MAX 2023 HD10 XMR
- Can-Am Defender MAX HD10 XMR 2023 with doors
- Can-Am Defender PRO HD10 Limited 2023
- Can-Am Defender HD10 Limited 2024
- Can-Am Defender HD10 XMR 2024
- 2024 Can-Am Defender HD10 Am Defender MAX HD10 Lone Star 2024
- Can-Am Defender MAX HD10 Lone Star CAB 2024
- Can-Am Defender MAX HD10 XMR 2024
- Can-Am Defender MAX HD10 XMR 2024 with doors
- Can-Am Defender PRO HD10 Limited 2024
