Suspension
High Lifter Can Am X3 4" Portal Gear Lift 30% Gear Reduction Suspension Suspension
Can Am X3 4" Portal Gear Lift 30% Gear Reduction
utv chassis parts, cheap utv parts, yamaha utv parts near me, farr utv parts,This High Lifter 4'' gate gear lift is sturdy and ready to take on any challenge. You'll love the 30% gear reduction, camber adjustment shims as needed, plus slotted brake rotors to move the gas, Coleman UTV 400 Parts, Joywhale 24V UTV Parts, Hisun UTV Parts 500, heat and water away from the rotors. Use a 33 inch tire or add front arms to use a 35 inch tire. Add some Outlaw 3s and hit the trails!
High Lifter Portal Gear Lift (Each kit includes 4 portal boxes)
Features:
- Forged Gear Boxes
- Strongest backing plate made
- Advanced sealing with Kevlar fiber seals
- Precision ground stainless steel rotors
- 100% more sealing surface
- Box offan speeds
- 30% speed reduction – Gives you more low-end torque for trail riding
- Power on demand – More power to the ground with less engine
- Lift It Up – Gain 4 inches of extra lift and improved track width
- Built Rugged – Constructed from 6061 aluminum and designed for the toughest terrain you can throw at them .
- Great Ride – Get all the benefits of extra torque and better clearance without compromising factory ride or suspension angles
- Camber Adjustment Shims – Adding or removing shims can adjust camber from -1.25° to +2°
- Perfect Machining – We guarantee the quality of our product 100%. The kits have been specially designed and machined to perfectly fit your ride.
- Slotted Brake Rotors – The slots cut into the flat metal surface away from each other.remove gas, heat and water from the surface of these rotors to improve braking performance large with gate: 33"
- Largest tire with front arm: 35"
Our tire fitting guide shown is a general fitment and is not in no case guaranteed. Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications. Always check your tire brand, Q-Parts, Hisun 700 UTV performance parts, lift, side-by-side performance parts and other modifications before making a purchasing decision.
Wheel Requirements :
- 14" or larger
- 14" factory wheels must have a 1" spacer.
- 14" and 15" cannot exceed 4-1/2" rear spacing
- 16" and above cannot exceed 5" rear spacing
- Can-Am Maverick X3 DSTurbo RR 2022 with Smart-Shox 72
- Can-Am Maverick X3 DS Turbo 64 2022
- Can-Am Maverick X3 DS Turbo RR 64 2022
- Can- Am Maverick X3 XDS Turbo RR 64 2022
- Can-Am Maverick -Am Maverick X3 XRC Turbo RR 2022 64
- Can-Am Maverick Can-Am Maverick X3 XMR Turbo RR 72 2022
- Can-Am Maverick X3 DS 2023 Turbo 64
- Can-Am Maverick Can-Am Maverick X3 RS Turbo RR 72 2023
- Can-A 2023m Maverick>2023 Can-Am Maverick X3 XMR Turbo RR 72
- 2023 Can-Am Maverick X3 XRC Turbo RR 64
- 2023 Can-Am Maverick li>2023 Can-Am Maverick X3 XRS Turbo RR 72
- 2023 Can-Am Maverick>
- 2017Can-Am Maverick X3 XDS
- 2017 Can-Am Maverick X3 XRS
- Can-Am Maverick /li>
- Can-Am Maverick X3 Turbo R 2018 XDS
- Can-Am Maverick X3 Turbo R XRS 2018
- Can-Am Maverick>
- Can-Am Maverick X3 Turbo XRC 2018
- Can-Am Maverick X3 Turbo XMR 2018
- Can-Am Maverick Can-Am Maverick X3 900 HO 2018
- Can-Am Maverick X3 Turbo 2019
- Can-Am Maverick XMR 2019
- Can-Am Maverick 2019 X3 Turbo R
- Can-Am Ma 2019verick X3 Turbo R XDS
- Can-Am Maverick X3 Turbo R /li>
- Can-Am Maverick X3 Turbo R XRC 2019
- Can-Am Maverick X3 2019 Turbo R XRS
- Can-Am Maverick li>Can-Am Maverick X3 Turbo XRC 2020
- Can-Am Maverick X3 Turbo XMR 2020
- Can-Am Maverick Am Maverick X3 Turbo R XRS 2020
- Can-Am Maverick X3 Turbo RR XDS 2020
- Can-Am Maverick X3 Turbo RR XMR 2020
- Can-Am Maverick X3 Turbo R 2020
- Can-Am Maverick
- Can-Am Maverick 2021 X3 Turbo XMR
- Can-Am Maverick X3 Turbo R DS 2021
- Can-Am Maverick X3 Turbo R RS 2021
- Can-Am Maverick X3 Turbo RR 2021 XDS
- Can-Am Maverick X3 Turbo RR XRS 2021
- Can-Am Maverick li>
- Can-Am Maverick X3 Turbo 2021 RR XMR
- 2021 Can-Am Maverick UTVS-X3-DP65 discountable, Make_Can Am, Model_X34.71 (381 reviews)
