Suspension
High Lifter Front Control Arm Kit Polaris RZR XP 1000 / Turbo (2014-2016) Suspension Suspension
Polaris RZR XP 1000 / Turbo (2014-2016) Front Control Arm Kit
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms that are twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires. Optional pre-installed ball joints.
High Lifter service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, Hisun 800 UTV Parts, Side by Side Parts .com, John Deere UTV parts, also making sure the clip is in place and secure. Purchasing control arms with the ball joints already installed prevents damage to thes due to improper installation, which is not covered by High Lifter's lifetime warranty.
The pre-installed ball joints in this kit are BJP-4.
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection and visual appeal. Don't be fooled by too much arch that puts your axles at greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precisely cut into the brace.
Installation is made easy with our step-by-step, multi-image instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, High Lifter will install your ball joints before shipping. (See ourcontrol arms with pre-installed ball joints.) Always check bearings, Edmonton side-by-side parts, bushings, ball joints and brake wear before installation and replace if necessary. We always recommend checking these parts before beginning your installation to save time and get back on track sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.
Features:
- 25% larger than average arms - Made from steel 1 ¼" DOM
- Up to 2.5 times the wall thickness of the average stock arm - 0.188 inch wall thickness
- Lubricators included for most models
- Added ground clearance with bends that maximize clearance and axle protection
- Most powder coat colors available from stock
- Easy to install and maintain
- Limited lifetime warranty
Tire Fitment: Up to 35 inches
Our tire fitment guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture and tire fitment may be affected by other modifications such as Bighorn UTV Parts, Weller UTV Parts but not limited to Winnipeg UTV Parts, Wheel Offset , the actual tire diameter and the actual tire width. Always check your brand of tires, lift, tomoto 700 utv parts and other modifications before making a purchasing decision.
NNote: In order to work on RZR Turbo and FOX Edition models , Hisun 700 UTV parts, you must remove the factory front stabilizer bar for these applications. The front stabilizer bar will not work with the High Lifter Maximum Clearance Kit when installed on Turbo and FOX Edition RZR models.
This kit comes with control arms only, without ball joints. VEHICLE ASSEMBLY- 2016 Polaris RZR 1000 XP EPS
- 2016 Polaris RZR 1000 XP High Lifter Edition
- 2016 Polaris RZR TURBO XP EPS
- 2016 Polaris RZR 1000 XP 4 EPS
- Polaris RZR TURBO 4 XP EPS 2016
- Polaris RZR 1000 XP 4 High Lifter Edition 2016
- Polaris RZR 1000 XP 2014
- Polaris RZR 1000 2014 XP 4
- 2014 Honda TRX 250 Lifter Edition
- 2015 Polaris RZR 1000 XP 4 EPS
- Polaris RZR 1000 XP FOX Edition 2015
Instructions
MCFFA-RZR1-B discountable, Make_Polaris, Model_RZR XP 1000, Model_RZR XP Turbo Color:Black|Ball Joints:No Ball Joints,Add Ball Joints4.84 (394 reviews)
