Suspension
High Lifter Front lower control arms Polaris RZR XP 1000 / Turbo (2014-2016) Suspension Suspension
Polaris RZR XP 1000 / Turbo (2014-2016) Front Lower Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms, twice as strong as your stock arms, Hisun 800 UTV Parts, Side by Side Parts.com, John Deere UTV Parts, with the added ground clearance you you need for all terrain and larger tires. .
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection and visual appeal. Don't be fooled by too much arch that puts your axles at greater risk of damage. Our pPrecision manufacturing process ensures each control arm installs exactly like the factory arm. Depending on the model, most kits will have the precision-cut High Lifter logo on the bracing.
Installation is made easy with our step-by-step, multi-picture instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, Edmonton side-by-side parts, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.)
Always check bearings, bushings, Bighorn UTV Parts, Weller UTV Parts, ball joints and brake wear before installation and replace - them if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.ire.
Features:
- 25% larger than average arms - Made from 1 1/4" DOM steel
- Up to 2.5 times the wall thickness of the average stock arm - 0.120" wall thickness
- Lubricators included for most models
- Safety guard added floor with curvatures that maximize axle clearance and protection
- Most powder coating colors available in stock
- Easy to install and maintain
- Limited Lifetime Warranty
Note: If you are using stock/OEM Polaris RZR 1000 wheels, the stock/OEM wheels will rub the rear bar of this control arm kit and will rub the paint off the OEM wheels and control arms at the contact points. friction is due to the narrow offset on stock/OEM wheels.
Note: A minimum 1" wheel spacer is required when using OEM/stock wheels with this kit Please see the numbers.part numbers WT4/15612. -15 for 1" spacers or WT4/15612-15 for 1.5" spacers.
Note: If using 1" or larger wheel spacers with (ANY STOCK/OEM POLARIS RZR 1000 WHEEL OR ANY AFTERMARKET WHEEL WITH A 6+1 or 5+2 OFFSET), you should have no issues with the wheels rubbing on this control arm kit.
Note: If you are using aftermarket wheels with a wider offset (4+3 or more), tomoto 700 utv parts, hisun 700 utv parts, you are There should be no problem with the aftermarket wheels rubbing on this kit. control arm.
Note: In order to work on RZR Turbo and FOX Edition models, you must remove the factory front stabilizer bar for these applications The front stabilizer bar will not work with the kit. Max High Lifter clearance when installed on RZR Turbo and FOX Edition models.
Vehicle Compatibility- Polaris RZR 1000 XP EPS 2016
- 2016 Polaris RZR 1000 XP High Lifter Edition
- 2016 Polaris RZR TURBO XP EPS
- 2016 Polaris RZR 1000 XP 4 EPS
- 2016 Polaris RZR 1000 XP 4 High Lifter Edition
- 2014 Polaris RZR 1000 XP
- 2014 Polaris RZR 1000 XP 4
- 2015 Polaris RZR 1000 XP EPS
- 2015 Polaris RZR 1000 XP High Lifter Edition
- Polaris RZR 1000 XP 4 EPS 2015
Instructions
MCFLA-RZR1-B discountable, Make_Polaris, Model_RZR XP 1000, Model_RZR XP Turbo Color:Black4.87 (397 reviews)
