Suspension
High Lifter Kawasaki KRX APEXX Front Front Control Arm Suspension Suspension
Kawasaki KRX APEXX Front Forward Control Arms
utv accessories near me,All new High Lifter APEXX control arms are stronger, armadillo utv 4s replacement parts, adjustable and designed for the toughest terrain with 1.75" of additional ground clearance and tilt forward 2". Push your machine to the limits and tackle obstacles you couldn't overcome before!
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during typical riding. The High Lifter arms are constructed from 1.5" DOM with .120 wall tubing. This is a 50% increase in size and a 70% increase in l steel for increased durability and strength.
Integrated adjustmentThe lower arms also feature a componentt adjustment in the ring collars to eliminate premature wear that can occur. from adding lift kits, gates or larger tires. When the kit is set to the factory position, pro utv parts utah, used utv parts for sale, massimo utv 500 parts, you have 3/8" of adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to have confidence in the force you add to your ride. This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized ground clearance by strategically arching the lower control arm with double bends. This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty trail obstacles. These turns maintain the factory geometry, whichwhich helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint Supports Gates and large tires apply torque that can distort the ball joint support, causing ball joint support to fail. arm. With an over 130% increase in ball joint mounting area, Q-Parts Knobs and Wholesale UTV Parts, we help prevent mounting bracket failure or "crushing."
NOTE: Pre-Installed Ball Joint Options come with four ball joints in total – two are pre-installed in the upper arms and two are included to replace the stock ball joints in the spindle if necessary. This appliesonly with pre-installed ball joint option.
Features:
- Heat treated adjustable collars for camber adjustment with 1" threads
- 2" forward tilt
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint supports to eliminate warping issues, compatible with Keller ball joints
- Ladder bar compatible with 1.5" ID clamps
- Extremely durable 1.5" x 0.120" DOM steel construction
- Up to 2" additional ground clearance over OEM lower arm
- Mounting adaptations for OEM brake lines using OEM tabs instead of P-clamps
- Connection angles Optimized Sway Bar
- Limited Lifetime Warranty (excludes wearable items such as bushings, Vendetta UTV parts, bearings, cones and ball joints)
- Coating en powder
- Kawasaki Teryx KRX 1000 2020
- Kawasaki Teryx KRX 1000 2021
- Kawasaki Teryx KRX 1000 special edition 2021
- Kawasaki Teryx KRX 1000 Trail 2021
- Kawasaki Teryx KRX 1000 2022
- Kawasaki Teryx KRX 1000 Special Edition 2022
- Kawasaki Teryx KRX 1000 Trail 2022
- Kawasaki Teryx KRX 1000 2023
- Kawasaki Teryx KRX 1000 eS 2023
- Kawasaki Teryx KRX 1000 Special Edition 2023
- Kawasaki Teryx KRX 1000 Trail 2023
- Kawasaki Teryx KRX 4 1000 eS 2023
- Kawasaki Teryx 2023 KRX 4 1000 eS Special Edition
- Kawasaki Teryx KRX 4 1000 SE 2023
Installation Instructions
KAW-0117-00-00 discountable, Make_Kawasaki, Model_Teryx KRX 1000 Color:Black|Ball Joints:No Ball Joints,Ball Joints Preinstalled4.65 (375 reviews)
