Sale!

High Lifter Kawasaki Teryx Slanted Rear Control Arm Assembly Suspension

$103

SKU: High Lifter Kawasaki Teryx Slanted Rear Control Arm Assembly Suspension
Category:

Suspension

High Lifter Kawasaki Teryx Slanted Rear Control Arm Assembly Suspension Suspension

Kawasaki Teryx Rear Raked Control Arm Set

Maximum clearance angled rear upper and lower control arms move the rear hubs rearward 2 inches for clearance without lifting the vehicle or increasing the center of gravity. The upper and lower control arms are made from heavy-duty 1.25-inch steel tubing and finished in original Kawasaki black powder coating. These arms allow you to run 31 inch tires without a lift. This kit has 2 settings. Up and not up. A must read! If you have a lift on your device, you need to remove the rear part of the lift. There are 2 shock position settings on your angled rear control arms. One for lifted vehicles and one for unlifted vehicles. You cannot install our rear lift kit with our rear control arm kit.

Our arms maximize ground clearance by strategically arching the rear control arms.e controls lower while following the axle angle for maximum clearance, axle protection and visual. call. Don't be fooled by too much arch that puts your axles at greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precisely cut into the brace.

Installation is made easy with our step-by-step, multi-image instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, ssr utv parts and accessories, jc whitney atv/utv parts and accessories, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.)

Always check bearings, bushings, side-by-side parts, ball joints and wearbrakes before installation and replace them if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.

Features:

  • 25% larger than average arms - Made from steel 1 1/4" DOM
  • Up to 2.5 times the wall thickness of an average stock arm
  • Lubricators included for most models
  • Added ground clearance with bends that maximize axle clearance and protection
  • Easy to install and maintain
  • Limited lifetime warranty
  • li>

Tire Mounting:

  • These arms allow you to roll 31 inch tires without lifting.

Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture.and tire fitment may be affected by other modifications such as, but not limited to, Honda UTV Parts Near Me, Wheel Offset, Diesel UTV Parts, Bobcat 3400 UTV Parts Manual, El Paso UTV parts, actual tire diameter. and the actual width of the tires. Always check your brand of tires, lift, Polaris UTV parts and other modifications before making a purchasing decision.

Must Read: This kit has 2 settings. Up and not up. If you have a riser on your device, you need to remove the rear part of the riser. There are 2 defined shock positions settings on your angled rear control arms. One for lifted vehicles and one for unlifted vehicles. You cannot install our rear lift kit with our rear control arm kit.

VEHICLE FITMENT
  • 2016 Kawasaki Teryx 800 4 LE
  • 2016 Kawasaki Teryx 800 4
  • Kawasaki Teryx 800 LE 2016
  • Kawasaki Teryx 800 2016
  • Kawasaki Teryx 800 2022
  • Kawasaki Teryx 800 4 2022
  • Kawasaki 2023 Teryx 800
  • 2023 Kawasaki Teryx 800 4
  • 2012 Kawasaki Teryx 750 4
  • 2013 Kawasaki Teryx 750 4
  • 2014 Kawasaki Teryx 800 LE 4
  • Kawasaki Teryx 800 2014 4
  • Kawasaki Teryx 750 4 EPS 2012
  • Kawasaki Teryx 750 4 EPS 2013
  • Kawasaki Teryx 800 2014
  • Kawasaki Teryx 800 LE 2014
  • Kawasaki Teryx 800 2015
  • Kawasaki Teryx 800 LE 2015
  • Kawasaki Teryx 800 4 2015
  • Kawasaki Teryx 800 4 LE 2015
  • Kawasaki Teryx 800 4 LE 2017
  • Kawasaki Teryx 800 4 2017
  • Kawasaki Teryx 800 4 LE 2017
  • Kawasaki Teryx 80 20170
  • Kawasaki Teryx 800 4 LE 2018
  • Kawasaki Teryx 800 4 2018
  • Kawasaki Teryx 800 LE 2018
  • Kawasaki Teryx 800 2018
  • Kawasaki Teryx 800 4 LE 2019
  • Kawasaki Teryx 800 LE 2019
  • Kawasaki Teryx 800 4 2019
  • Kawasaki Teryx 8002019
  • Kawasaki Teryx 800 2020
  • Kawasaki Teryx 800 LE 2020
  • Kawasaki Teryx 800 4 2020
  • Kawasaki Teryx 800 4 LE 2020
  • Kawasaki Teryx 800 2021
  • Kawasaki Teryx 800 2021
  • Kawasaki Teryx 800 4 2021
  • Kawasaki Teryx 800 4 LE 2021
  • 2021 Kawasaki Teryx 800 4 Camo
INSTALLATION

Instructions

AX-4-34-FL-0-DT discountable, Make_Kawasaki, Model_Teryx4.71 (381 reviews)