Suspension
High Lifter Polaris Ranger XP 1000 APEXX Front Offset Control Arms Suspension Suspension
Polaris Ranger XP 1000 APEXX Front Forward Offset Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms, trail wagon utv parts, twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires. large.
Features:
Features:
- Heat treated adjustable collars for camber adjustment with 1" threads
- 1.5" forward tilt
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint supports to eliminate warping issues, piutv parts American Sportworks, utv parts guys, subaru bulldog utv parts, compatible with Keller ball joint
- Ladder bar compatible with 1.5" ID clamps
- Steel construction Extremely durable 1.5" x 0.120" DOM
- Up to 2" added reduced ground clearance compared to the stock lower arm.
- Mounting adaptations for stock brake lines using stock tabs instead of P-clamps.
- Optimized stabilizer bar link angles
- Limited life Warranty (excludes wearable items such as bushings, 8 passenger ATV, bearings, cones and Heim seals)
- Powder coated
- Custom colors available upon request. (Customer must provide paint code)
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. Upper control arms supplied stock on a Polaris Ranger are more robust than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. The High Lifter arms are constructed from 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in thickness of l steel for increased durability and strength.
Integrated AdjustmentThe lower arms also feature an adjustment component in the bushing collars to eliminate premature wear that can come from adding lift kits, gates or larger tires When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat treated and plated adjustable socket collars allow you to have conconfidence in the strength you add to your driving. This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized ground clearance by strategically arching the lower control arm with DOUBLE and TRIPLE bends. This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty trail obstacles. These elbows maintain factory geometry, which helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We've upgraded the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced ball joint supportsThe gates and gros tires apply torque that can distort the ball joint support, leading to arm failure. With an increase of over 130% in ball joint mounting area, we help prevent mounting bracket failure or "play."
Tire Mounting: Up to 31 inches. Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture and tire fitment may be affected by other modifications such as Bush Hog UTV parts, Knoxville Tn side by side parts, but not limited to wheel offset, Black Friday UTV accessories. actual tire diameter and actual tire width. Always check your tire brand, lift and other modifications before making a purchasing decision.
Optional pre-installed ball jointsHigh Lifter's service team uses a hydraulic press to install the baseFill the joint with the pressurecorrect on and alignment, also ensuring that the clip is in place and secure. Purchasing control arms with the ball joints already installed makes installation easier and avoids damage due to improper installation, which is not covered by High Lifter's lifetime warranty. The ball joints pre-installed in this kit are BJP-3 and BJP-5.
VEHICLE FITMENT- 2018 Polaris Ranger 1000 XP
- 2018 Polaris Ranger 1000 XP Northstar
- Polaris Ranger 1000 XP Crew Northstar 2019
- Polaris Ranger 1000 XP Crew 2019
- Polaris Ranger 1000 XP 2019
- Polaris Ranger 1000 XP Premium 2019
- 2019 Polaris Ranger 1000 XP 20th Anniversary Edition
- 2019 Polaris Ranger 1000 XP Crew Premium
- 2019 Polaris Ranger 1000 XP Crew 20th Anniversary Edition
- 2019 Polaris Ranger 1000 XP Northstar
- Polaris Ranger 1000 XP High Lifter Edition 2019
- Polaris Ranger 1000 XP Crew High Lifter Edition 2019
- Polaris Ranger 1000 XP Ba 2019ck Country
- Polaris Ranger 1000 XP Crew Back Country 2019
- Polaris Ranger 1000 XP Premium 2020
- Polaris Ranger 1000 XP NorthStar 2020
- Polaris Ranger 1000 XP Texas Edition 2020
- Polaris Ranger 1000 XP High Lifter Edition 2020
- Polaris Ranger 1000 2020
- Polaris Ranger 1000 EPS 2020 li>
- Polaris Ranger 1000 Premium 2020
- Polaris Ranger 1000 XP Crew Premium 2020
- Polaris Ranger 1000 XP Crew NorthStar 2020
- Polaris Ranger 1000 XP Crew Texas Edition 2020
- Polaris Ranger 1000 XP Crew High Lifter Edition 2020
- Polaris Ranger 1000 Crew 2020
- Polaris Ranger 1000 Crew EPS 2020
- Polaris 2020 Ranger 1000 Crew Premium
Instructions
, used utv parts for sale AA-P-RAN1K-R-OHC-02 discountable, Make_Polaris, Model_Ranger 1000, Model_Ranger XP !000 Color:Black|Ball Joints:No Ball Joints,Preinstalled Ball Joints4.77 (387 reviews)
