Suspension
High Lifter Polaris Ranger XP 900 APEXX Front Offset Control Arms Suspension Suspension
Polaris Ranger XP 900 APEXX Front Forward Offset Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms that are twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires.
Features
- Heat-treated adjustable collars for camber adjustment with 1" threads
- 1.5" forward lean
- Over 3 degrees of camber adjustment in each direction
- Heavy-duty ball joint supports to eliminate warping issues, compatible with Keller ball joints
- Ladder bar compatible with the pinces 1.5" ID
- Extremely durable 1.5" x 0.120" DOM steel construction
- Up to 2" additional ground clearance over lower arm OEM
- OEMines brake mounting housings using OEM tabs instead of P-clamps
- Optimized stabilizer bar link angles
- Limited lifetime warranty ( excludes wearable items such as rings, bearings, cones and Heim seals)
- Powder coated
- Custom colors available upon request. (Customer must provide paint code)
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. The stock upper control arms on a Polaris Ranger are sturdier than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material to plus strength, higher performance UTV parts, so they can withstand the abuse applied during typical driving. The High Lifter arms are constructed from 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in thickness of l steel for increased durability and strength.
Integrated AdjustmentThe lower arms also feature an adjustment component in the clamps to eliminate premature wear that can come from adding lift kits, gates or larger tires When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to have confidence in the force you add to your ride. This kit comes packaged and preset to factory position, yuma az utv parts, utv parts and accessories nearhome, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized ground clearance by strategically arching the lower control arm with DOUBLE and TRIPLE bends . This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty trail obstacles. These elbows maintain factory geometry, which helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint Supports Gates and large tires apply torque that can distort the ball joint support, causing ball joint failures. With an increase of over 130% in ball joint mounting area, we help prevent mounting bracket failure or "play."
Tire Mounting: Up to 31 inches. Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture and tire fitment may be affected by other modifications such as 2003 Polaris UTV Parts, but not limited to Polaris UTV Track Parts, wheel offset, actual tire diameter and actual tire width. Always check your tire brand, JC Whitney ATV/UTV parts and accessories, lift and other modifications before making a purchasing decision.
Optional Pre-Installed Ball JointsThe Team High Lifter's service uses a hydraulic press to install the joint ball with the correct pressure and alignment, also making sure the clip is in place and secure.Purchasing control arms with the ball joints already installed makes installation easier and avoids damage due to improper installation, which is not covered by High Lifter's lifetime warranty. The ball joints pre-installed in this kit are BJP-3 and BJP-5.
VEHICLE FITMENT- 2016 Polaris Ranger 570 Full-Size XP
- 2016 Polaris Ranger 900 XP
- 2016 Polaris Ranger 1000 DSL
- 2016 Polaris Ranger 570-4 Full Size Crew
- 2016 Polaris Ranger 570-6 Full Size Crew
- Polaris Ranger 900-5 Crew EPS 2016
- Polaris Ranger 900-6 Crew EPS 2016
- Polaris Ranger 1000 DSL Crew 2016
- Polaris Ranger 900 XP 2013
- 2014 Polaris Ranger 900 XP
- 2014 Polaris Ranger 900 XP Crew
- 2015 Polaris Ranger 570 Full Size
- 2015 Polaris Ranger 570 Crew Full Size
- 2015 Polaris Ranger 570 Crew Full Size EPS
- 2015 Polaris R Anger 900 XP
- 2015 Polaris Ranger 900 XP EPS
- 2015 Polaris Ranger 900 XP Crew
- 2015 Polaris Ranger 900 XP Crew EPS
- 2015 Polaris Ranger 1000 DSL
- 2015 Polaris Ranger 1000 DSL Crew
- 2017 Polaris Ranger 1000 XP
- 2017 Polaris Ranger 1000 XP Crew
- Polaris Ranger 1000 XP Crew EPS 2017
- Polaris Ranger 1000 XP EPS 2017
- 2017 Polaris Ranger 1000 XP SE
- 2017 Polaris Ranger 900 XP
- 2017 Polaris Ranger 900 Crew
- 2017 Polaris Ranger 900 Crew EPS
- Polaris Ranger 900 EPS 2017
- Polaris Ranger DSL 2017
- 2017 Polaris Ranger DSL Crew
- 2017 Polaris Ranger DSL HST Deluxe
- 2017 Polaris Ranger 1000 XP Northstar
- 2018 Polaris Ranger DSL
- 2018 Polaris Ranger DSL Crew
- Polaris Ranger 900 XP 2018
- Polaris Ranger 900 Crew 2018
- Polaris Ranger 1000 XP Crew 2018
- Polaris 2018 Ranger 1000 XP Northstar Crew
- Polaris Ranger 1000 XP Northsta 2017r Crew
- Polaris Ranger 900 XP 2019
- Polaris Ranger 900 Crew 2019
Instructions
400FP0006 discountable, Make_Polaris, Model_Ranger 900 Color:Black|Ball Joints:No Ball Joints,Add Ball Joints4.76 (386 reviews)
