Sale!

High Lifter Polaris Ranger Front Control Arm Suspension

$99

SKU: High Lifter Polaris Ranger Front Control Arm Suspension
Category:

Suspension

High Lifter Polaris Ranger Front Control Arm Suspension Suspension

Polaris Ranger Front Control Arms

Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms that are twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires. Optional pre-installed ball joints.

High Lifter's service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, Realtree UTV Parts 24V, in s also ensuring the clip is fully in place and secure. Purchasing control arms with the ball joints already installed avoids damage due to improper installation, whichis not covered by High Lifter's lifetime warranty.

The pre-installed ball joints in this kit are BJP-3.

Our arms maximize ground clearance by strategically arching the lower control arm while following axle angle for maximum clearance, Realtree XD UTV 24V Replacement Parts, axle protection and visual appeal. Don't be fooled by too much arch that puts your axles at greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precisely cut into the brace.

Installation is made easy with our step-by-step, multi-image instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, High Lifter will install your ball joints before shipping. (See no.s control arms with pre-installed ball joints.) Always check bearings, ATV parts, bushings, ball joints and brake wear before installation and replace if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. See the Replacement Parts tab to purchase replacement parts if necessary.

Features:

  • 25% larger than average arms - Made from DOM steel 1 ¼"
  • Up to 2.5x the wall thickness of the average stock arm - 0.188" wall thickness
  • Lubricators included for most models
  • Added ground clearance with curvatures that maximize axle clearance and protection
  • Most powder coat colors available from stock
  • Easy to install and maintain
  • Limited lifetime warranty

Tire mounting :

  • Polaris Ranger 900 XP - Up to 28"
  • Polaris Ranger 900 XP Crew - Up to 28"

Tire mounting with lift kit:

  • Polaris Ranger 900 XP - Up to 30"
  • Polaris Ranger 900 XP Crew - Up to 30"

Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacture and tire fitment may be affected by other modifications such as odes utv 150 parts what are utv parts but not limited to wheel offset, actual tire diameter and actual tire width. Always check your brand of tires, lift, 2002 Polaris UTV parts, Rhino 700 UTV performance parts, used Polaris UTV parts, Vector 500 UTV parts and other modifications before making a decision to purchase.

Note: If a customer is using or considering using Outlaw DHT front axles and this front A-arm kitant, he will need to add the Polaris Steering Stop Kit (Part # RANGER-SSK) to avoid clearance issues on the CV boot.

Note: Be sure to check for worn ball joints, bearings and bushings before installation and replace if necessary. If ball joints are required, see Part No. BJP-3; for wheel bearings, see part number WBK-25-1628; For lower control arm bushings, see part number BK-50-1076. Note: If a customer uses or will purchase the front control arms and wishes to use them with BUMPER-RNG9 (or any similar bumper), the bumper will need to be modified/cut/trimmed to clear any 28" or larger tire .

This kit comes with control arms only, no ball joints VEHICLE FITMENT
  • 2016 Polaris Ranger 570 Full-Size XP
  • 2016 Polaris Ranger 900 XP
  • 2016 Polaris Ranger 1000 DSL
  • Polaris Ranger 570-4 Crew Full Size 2016
  • PolarisRanger 570-6 Crew Full Size 2016
  • Polaris Ranger 900-5 Crew EPS 2016
  • Polaris Ranger 900-6 Crew EPS 2016
  • Polaris Ranger 1000 DSL Crew 2016
  • Polaris Ranger 900 XP 2013
  • Polaris Ranger 900 XP 2014
  • 2014 Polaris Ranger 900 XP Crew
  • 2015 Polaris Ranger 570 full size
  • 2015 Polaris Ranger 570 Crew full size
  • 2015 Polaris Ranger 570 Crew EPS full size
  • Polaris Ranger 900 XP 2015
  • Polaris Ranger 900 XP EPS 2015
  • Polaris Ranger 900 XP Crew 2015
  • Polaris Ranger 900 XP Crew EPS 2015
  • Polaris Ranger 1000 DSL 2015
  • Polaris Ranger 1000 DSL Crew 2015
  • Polaris Ranger 1000 XP Crew 2017
  • Polaris Ranger 1000 XP Crew 2017
  • Polaris Ranger 1000 XP Crew EPS 2017
  • Polaris Ranger 1000 XP EPS 2017
  • Polaris Ranger 1000 XP SE 2017
  • Polaris Ranger 900 XP 2017
  • Polaris Ranger 900 Crew 2017
  • Polaris Ranger 900 Crew EPS 2017
  • Polaris Ranger 900 EPS 2017
  • Polaris Ranger DSL 2017
  • Polaris Ranger DSL Crew 2017
  • Polaris Ranger DSL HST Deluxe 2017
  • Polaris Ranger 1000 XP Northstar 2017
  • Polaris Ranger DSL 2018
  • Polaris Ranger DSL Crew 2018
  • Polaris Ranger 900 XP 2018
  • Polaris Ranger 900 Crew 2018
  • Polaris Ranger 1000 XP Crew 2018
  • Polaris Ranger 1000 XP Northstar Crew 2018
  • Polaris Ranger 1000 XP Northstar Crew 2017
  • Polaris Ranger 900 XP 2019
  • Polaris Ranger 900 Crew 2019
INSTALLATION

Instructions

PK-DIFF-P-001#RAN discountable, Make_Polaris, Model_Ranger 1000, Model_Ranger 570, Model_Ranger 900, Model_Ranger XP !000 Color:Black|Ball Joints:No Ball Joints,Add Ball Joints4.55 (365 reviews)