Suspension
High Lifter Polaris Ranger Midsize APEXX Front Offset Control Arms Suspension Suspension
Polaris Ranger Midsize APEXX Front Forward Offset Control Arms
UTV Accessories Las Vegas,Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms that are twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires.
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection and visual appeal. Don't be fooled by too much arch that puts your axles at greater risk of damage. Our precision manufacturing process guaranteesit that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precision cut into the brace.
Installation is made easy with our step-by-step, multi-picture instructions. When installing UTV heater parts, you can use stock bushings and ball joints for easy installation. Best of all, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.) Always check bearings, UTV racing parts, bushings, ball joints and brake wear before installation and replace if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.
Features:
- Arms 25% larger than averagee - Manufactured from 1 ¼" DOM steel
- Up to 2.5 times the wall thickness of an average stock arm - 0.188" wall thickness
- Lubricators included for most models
- Added ground clearance with bends that maximize clearance and axle protection
- Most powder coat colors available in stock
- Easy to install and maintain
- Limited lifetime warranty
Tire fitting:
- Up to 27"
Tire mounting with lift kit:
- Polaris Ranger EV - Up to 27"
- Polaris Ranger 400/500/ 570/700/800 - Up to 30"
Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications such as UTV accessories financing, but not limited to Trailmaster UTV parts,wheel offset, NRP UTV parts, actual tire diameter and actual tire width. Always check your tire brand, lift, Utah UTV parts and other modifications before. make a purchasing decision.
Note: Be sure to check worn ball joints, Used UTV Parts Alberta, bearings and bushings before installation and replace if necessary. Note: This is a front arm only kit comes with two lower control arms and grease fittings.
VEHICLE FITMENT- 2006 Polaris Ranger 700 4x4
- 2007 Polaris Ranger 700 4x4
- 2006 Polaris Ranger 700 4x4
- 2009 Polaris Ranger 700 CREW 4x4
- 2008 Polaris Ranger 700 CREW 4x4
- 2009 Polaris Ranger 700 6x6
- 2008 Polaris Ranger 700 6x6
- 2007 Polaris Ranger 700 6x6
- 2006 Polaris Ranger 700 6x6
- 2008 Polaris Ranger 700 4x4
- 2007 Polaris Ranger 700 4x4
- 2011 Polaris Ranger 500 EFI Crew 4x4 Mid Size
- 2011 Polaris Ranger 500 EFI 4x4 Mid Size
- 2008 Polaris Ranger 500 EFI 4x4
- 2007 Polaris Ranger 500 EFI 4x4
- 2006 Polaris Ranger 500 EFI 4x4
- 2007 Polaris Ranger 500 4x4
- 2006 Polaris Ranger 500 4x4
- 2011 Polaris Ranger 400 4x4 mid size
- 2010 Polaris Ranger 400 4x4 mid-size
- 2008 Polaris Ranger 500 2x4
- 2009 Polaris Ranger 500 2x4
- 2012 Polaris Ranger 500 EFI 4x4 Mid-Size
- 2012 Polaris Ranger 400 4x4 Mid-Size
- 2012 Polaris Ranger EV
- 2012 Polaris Ranger 500 EFI Crew 4x4 Mid-Size
- 2013 Polaris Ranger 800 mid-size
- 2013 Polaris Ranger 500 EFI 4x4 mid-size
- 2013 Polaris Ranger 400 4x4 mid-size
- 2013 Polaris Ranger EV
- Polaris Ranger 500 EFI Crew 4x4 Midsize 2013
- Polaris Ranger 400 4x4 Midsize 2014
- Polaris Ranger 570 Midsize2014 Size
- 2014 Polaris Ranger 800 Midsize
Instructions
TRRA-P-RAN-MID-14-ST-001 discountable, Make_Polaris, Model_Ranger 570, Model_Ranger 700, Model_Ranger 8004.77 (387 reviews)
