Suspension
High Lifter Polaris RZR 800 Front Offset Control Arms Suspension Suspension
Polaris RZR 800 Front Forward Offset Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms, 10-ply UTV tires, twice as strong as your stock arms, with the extra ground clearance you need for any terrain and larger tires .
Our arms maximize the ground. clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, parts store, Thunder UTV 24V parts, axle protection and visual appeal. Don't be fooled by too much arch that puts your axles at greater risk of damage. NOur precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precisely cut into the brace.
Installation is made simple with our step-by-step, multi-picture instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.) Always check bearings, UTV parts, bushings, ball joints and brake wear before installation and replace if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Visit the Replacement Parts tab to purchase replacement parts if necessary.
Features:
- 25% larger arms que the average - Made from 1 ¼" DOM steel
- Up to 2.5 times the wall thickness of an average stock arm - 0.188 inch wall thickness
- Lubricators included on most models
- Added ground clearance with bends that maximize clearance and axle protection
- Most upholstery colors in powder available in stock
- Easy to install and maintain
- Limited lifetime warranty
Tire fitting:
- Polaris RZR 800 "S" 2 seats - Up to 29.5 "
- Polaris RZR 800 "4" 4 seats - Up to 29.5"
Tire mounting with lifting kit:
- Polaris RZR 800 "S" 2 seats - Up to 31"
- Polaris RZR 800 "4" 4 seats - Up to 31"
Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and risers vary by manufacture and tire fitment may be affected by other changes such aseu, but not limited to, wheel offset, utv parts from facebook market, actual tire diameter and actual tire width. Always check your brand of tires, Cleveland Ohio UTV parts, lift, Tomoto 700 UTV parts and other modifications before making a purchasing decision.
Note: This kit comes with replacement tie rods. Factory tie rod ends are reused, so be sure to check/inspect your factory tie rod ends and replace if necessary when installing the new tie rods included in this kit.
Note: If a customer is using or planning to use Outlaw DHT front axles and this front A-arm kit, they will need to add the Polaris steering stop kit to avoid trunk clearance issues Resume (RANGER-SSK).
Note: Be sure to check for worn ball joints, 2000 UTV MX parts, bearings andbushings before installation and replace them if necessary. If ball joints are required, see part number BJP-2; for bearings, see part number WBK-25-1628; for bushings, see part number BK-50-1049.
VEHICLE FITMENT- 2011 Polaris RZR 800 S
- 2010 Polaris RZR 800 S
- 2011 Polaris RZR 800 4
- 2010 Polaris RZR 800 4
- 2009 Polaris RZR 800 S
- 2012 Polaris RZR 800 S
- 2012 Polaris RZR 800 4
- 2013 Polaris RZR 800 S
- 2013 Polaris RZR 800 4
- 2013 Polaris RZR 800 4 EPS
- 2014 Polaris RZR 800 S
- 2014 Polaris RZR 800 4
Instructions
MCFFA-RZRS-B discountable, Make_Polaris, Model_RZR 800 Color:Black4.64 (374 reviews)
