Suspension
High Lifter Polaris RZR XP 900 Front Offset Control Arms Suspension Suspension
Polaris RZR XP 900 Front Forward Offset Control Arms
3D Printed UTV Parts, Whether you ride through deep mud or rocky trails, Used ATV UTV Parts, Pitster Pro 150 UTV Parts, the need for stronger control arms with extra ground clearance is extremely important . Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy-duty control arms, UTV chassis parts, twice as strong as your stock arms, with the extra ground clearance you need for any terrain and bigger tires .Our arms maximize ground clearance. by strategically arching the lower control arms while following the angle of the axle for maximum clearance, axle protection and visual appeal. Don't be fooled by too much arch that exposes your eaxles at greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the precision-cut High Lifter logo on the bracing.
Installation is made easy with our step-by-step, multi-picture instructions. When installing, you can use original bushings and ball joints for easy installation. Best of all, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.) Always check bearings, bushings, USA made utv accessories, cheap utv parts, ball joints and brake wear before installation and replace them if necessary. We always recommend checking these parts before beginning your installation to save time and get back on the trail sooner. Check the AC spare parts tabHeter replacement parts if necessary.
Features:
- 25% larger than average arms - Made from 1 ¼" DOM steel
- Up to 2.5 times the wall thickness of the average stock arm - 0.188 inch wall thickness
- Lubricators included for most models
- Added ground clearance with bends that maximize clearance and axle protection
- Most powder coat colors available from stock
- Easy to install and maintain
- Limited Lifetime Warranty
- Best of all, hyper utv-1000 replacement parts, bulldog 300 utv parts, this kit works with our 2" lift kits!
- Polaris RZR 900 XP 2 seats - Up to 30"
- Polaris RZR 900 XP 4 seats - Up to to 30"
- Polaris RZR 900 XP 2 seater - Up to 32.5"
- Polaris RZR 900 XP 4 seats - Up to32.5"
- 2011 Polaris RZR XP 900
- 2012 Polaris RZR XP 900
- 2012 Polaris RZR XP 900 4
- 2013 Polaris RZR XP 900
- 2013 Polaris RZR XP 900 EPS
- 2013 Polaris RZR XP 900 4
- 2013 Polaris RZR XP 900 4 EPS
- Polaris RZR 2014 XP 900
- Polaris RZR 2014 XP 900 4
- 2013 Polaris RZR XP 900 4 Jagged MCFFA-RZR9-B discountable, Make_Polaris, Model_RZR XP 900 Color:Black4.67 (377 reviews)
Tire fitting:
Tire mounting with lift kit:
Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lift systems vary by manufacturer and tire fitment may be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. Always check your tire brand, lift and other modifications before. to make a purchasing decision.
NOTE: If a customer is using or considering using Front Outlaw DHT axles and this front A-arm kit, the Polaris Steering Stop Kit will need to be added (part # RANGER-SSK) to avoid clearance issues on the CV trunk.
NOTE: If the customer has the Walker Evans Edition and is using stock wheels, they You will need 1" spacers on the front to prevent the tires from rubbing on the front shock absorbers! (PART# WT4/156-1)
ADAPTATION OF THE VEHICLE
