Suspension
High Lifter Polaris RZR XP APEXX Front Offset A-Arms Suspension Suspension
Polaris RZR XP APEXX Front Offset A-Arms
All new APEXX High Lifter Control Arms are stronger, adjustable and designed for the toughest terrain with 1.75" of additional ground clearance and 1.5" forward lean. Push your Polaris RZR to the limits and tackle obstacles you couldn't overcome before! Optional pre-installed ball joints.
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. The High Lifter arms are constructed from 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in thickness of l steel for increased durability and strength.
Integrated AdjustmentThe lower arms also feature an adjustment componentremove the ring collars to eliminate premature wear that can occur. from adding lift kits, UTV parts with affirmation, gates, 8 ply UTV tires or larger tires. When the kit is set to the factory position, you have 3/8" of adjustable camber inside and out. Heat-treated and plated adjustable socket collars allow you to have confidence in the strength that you add to your ride This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized the. ground clearance by strategically arching the lower control arm with DOUBLE and TRIPLE bends. This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty obstacles on those trails. maintain factory geometry, which helps reducee wear of components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint Supports Gates and large tires apply torque that can distort the ball joint support, causing arm failure. With an increase of over 130% in ball joint mounting area, we help prevent mounting bracket failure or "play."
Tire Mounting: Up to 34.5 inches. Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications such as Z-pieces, but not limited to, thewheel offset, actual tire diameter and actual tire width. , lift, kymco utv parts online and other modifications before making a purchasing decision.
Optional pre-installed ball jointsHigh Lifter service team uses a hydraulic press to install the joint ball joint with the correct pressure and alignment, which also ensures the clip is fully seated and secure. Purchasing control arms with the ball joints already installed makes installation easier and avoids damage due to improper installation, Rhino 700 UTV Performance Parts. is not covered by High Lifter's lifetime warranty.
Features:
- Adjustable heat-treated collars for camber adjustment with 1 inch threads
- 1.5" forward angled
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint supports to eliminate camber issuesforming, part exit, compatible with Keller ball joint
- Bar scale compatible with 1.5" ID collets
- Extremely durable 1.5" x 0.120" DOM steel construction
- Up to 2" additional ground clearance over OEM lower arm
- Mounting adaptations for OEM brake lines using OEM tabs instead of clamps P-shaped
- Optimized sway bar link angles
- Limited lifetime warranty (excludes wearable items such as bushings, cost of UTV parts, bearings, cones and Heim seals)
- Powder Coating
- 2024 Polaris RZR 1000 XP 4 Ultimate
- 2024 Polaris RZR 1000 XP Premium
- Polaris RZR 1000 XP Sport 2024
- Polaris RZR 1000 XP Ultimate 2024
