Sale!

High Lifter Polaris RZR Pro XP APEXX Front Lower Control Arms Suspension

$91

SKU: High Lifter Polaris RZR Pro XP APEXX Front Lower Control Arms Suspension
Category:

Suspension

High Lifter Polaris RZR Pro XP APEXX Front Lower Control Arms Suspension Suspension

Polaris RZR Pro XP APEXX Front Lower Control Arms

All new APEXX High Lifter Control Arms are stronger, Parts Store, Massimo UTV Parts Catalog, adjustable and designed for the toughest terrain with 1.75" of additional ground clearance. Push your Polaris RZR PRO XP to the limits and tackle obstacles you couldn't overcome before! Optional pre-installed ball joints.

Features:

  • Heat treated adjustable collars for! camber adjustment with 1 inch threads
  • Heavy duty ball joint supports eliminate warping issues, compatible with Keller ball joints
  • Clamp compatible ladder bar 1.5" ID
  • Extremely strong 1.5" x 0.188" DOM steel construction
  • 1.75" of additional ground clearance over lower arm
  • Mounting housings for original brake lines using original tabs instead of clampss in P
  • Limited lifetime warranty (excludes wearable items such as bushings, bearings, cones, Massimo 500 UTV parts and Heim seals)
  • Powder coated
  • Custom colors available upon request. (Customer must provide paint code)

Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. The stock upper control arms on a Polaris RZR PRO XP are sturdier than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a typical ride. The High Lifter arms are constructed from 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in thickness of l steel for durabilityt increased strength.

Integrated AdjustmentThe lower arms also feature an adjustment component in the bushing collars to eliminate premature wear that can occur. from adding lift kits, gates, Dell UTV parts or larger tires. When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to be confident in the force you add to your ride This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.

Increased Ground ClearanceWe have. maximized ground clearance by strategically arching the lower control arm with DOUBLE and TRIPLE bends. This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty trail obstacles.s. These elbows maintain factory geometry, which helps reduce wear on components such as axles and tie rods. Our front arms allow you to run larger tires without a suspension lift.

Reinforced Ball Joint Supports Gates and large tires apply torque that can distort the ball joint support, parts for hisun 700 utv 2012 , rough country utv parts, leader in weapon failure. With an increase of over 130% in ball joint mounting area, we help prevent mounting bracket failure or "play."

Tire Mounting: Up to 34.5 inches. Our tire fitting guide is a general fitment and is not guaranteed in any way. Tires and lift systems vary by manufacturer and tire fitment may be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width . Checkalways your brand of tires, Bobcat UTV 3400 parts, lift and other modifications before making a purchasing decision.

Optional Pre-Installed Ball JointsHigh Lifter Service Team Uses a hydraulic press to install the ball joint with the correct pressure and alignment, also ensuring the clip is in place and secure. Purchasing control arms with the ball joints already installed makes installation easier and avoids damage due to improper installation, utv replacement parts, ebay utv parts, 4s1 utv parts, which are not covered under utv's lifetime warranty High Lifter. The ball joints pre-installed in this kit are BJP-4.

VEHICLE FITMENT
  • 2020 Polaris RZR PRO XP
  • 2020 Polaris RZR PRO XP 4
  • 2020 Polaris RZR PRO XP 4 Premium
  • Pola 2020ris RZR PRO XP 4 Ultimate
  • Polaris RZR PRO XP Premium 2020
  • Polaris RZR PRO XP Ultimate 2020
  • Polaris RZR PRO XP 4 Premium 2021
  • Polaris RZR PRO XP 4 Sport 2021
  • Polaris RZR PRO XP 4 Ultimate 2021
  • Polaris RZR PRO XP Premium 2021
  • Polaris RZR PRO XP Sport 2021
  • Polaris RZR PRO XP Ultimate 2021
INSTALLATION

Instructions

discountable, Make_Polaris, Model_RZR PRO XP Color:Black|Ball Joints:Add Ball Joints4.72 (382 reviews)