Suspension
High Lifter Polaris RZR Pro XP APEXX Front Offset Control Arms Suspension Suspension
Polaris RZR Pro XP APEXX Front Forward Offset Control Arms
All new APEXX High Lifter Control Arms are stronger, parts store, Massimo UTV parts catalog, adjustable and designed for the toughest terrain with 1.75 "additional ground clearance and a forward lean of 1.5". Push your Polaris RZR PRO XP to the limits and tackle obstacles you couldn't overcome before! Optional pre-installed ball joints.
Features:
- Heat-treated adjustable collars for camber adjustment with 1" threads
- Sloped to 1.5" front
- Over 3 degrees of camber adjustment in each direction
- Heavy duty ball joint supports to eliminate warping issues, compatible with Keller ball joints
- Ladder bar compatible with 1.5" ID
- Extremely durable 1.5" x 0.120" DOM steel construction
- Up to 2" ground clearanceadditional over OEM lower arm
- Mounting housings for OEM brake lines using OEM tabs instead of P-clamps
- Optimized stabilizer bar link angles
- Limited lifetime warranty (excludes wearable items such as bushings, bearings, cones, Massimo 500 UTV parts and Heim seals)
- Powder coated
- Custom colors available upon request. (Customer must provide paint code)
Heavy Duty StrengthHigh Lifter's new heavy-duty control arms add more support than factory ones. The stock upper control arms on a Polaris RZR PRO XP are sturdier than the stock lower control arms, leaving the lower arms more vulnerable to damage. Our upper and lower arms are made with the same material for added strength, so they can withstand the abuse applied during a ridetypical. The High Lifter arms are constructed from 1.5" DOM with .188 wall tubing. This is a 50% increase in size and a 70% increase in thickness of l steel for increased durability and strength.
Integrated AdjustmentThe lower arms also feature an adjustment component in the bushing collars to eliminate premature wear that can occur from the addition of lift kits. , gates, Dell's Deals UTV parts or larger tires When the kit is set to the factory position, you have 3/8" adjustable camber inside and out. Heat treated and plated adjustable bushing collars allow you to have confidence in the force you add to your ride. This kit comes packaged and pre-adjusted to the factory position, and factory bushings and caps must be used for installation.
Increased Ground ClearanceWe have maximized ground clearance by archingStrategically nt the lower control arm with DOUBLE and TRIPLE bends. This unique design allowed us to get an extra 1.75 inches of ground clearance to avoid hitting those nasty trail obstacles. These elbows maintain factory geometry, which helps reduce wear on components such as axles and tie rods. Our front arms allow you to ride larger tires without suspension lift. We improved the upper control arm by repositioning the stabilizer bar tab. This will reduce extreme angles on the stabilizer bar links and reduce wear.
Reinforced Ball Joint SupportsGates and Rge tires apply torque that can distort the ball joint support, causing arm failure. With over 130% increase in ball joint mounting area, 2012 hisun 700 utv parts and rough country utv parts, we helps to prevent failure or "crushing" of the mounting bracket.
Tire Fitting: Up to 34.5"Our tire fitting guide is a general fitment and is in no way guaranteed Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications such as, but not limited to, wheel offset, actual tire diameter and actual tire width. .Always check your brand of tires, Bobcat UTV 3400 parts, lift and other modifications before making a purchasing decision. If you are using a stock 6+1 wheel, we recommend a wheel space. 1".Â
Optional Pre-Installed Ball JointsThe High Lifter service team uses a hydraulic press to install the ball joint with the correct pressure and alignment, also ensuring the clip is securely in place. place and secure. Purchase control arm with ball jAnoints already installed make inst easyallation and avoid damage due to improper installation, utv replacement parts, ebay utv parts, 4s1 utv parts, which are not covered by High Lifter's lifetime warranty. The ball joints pre-installed in this kit are BJP-4.
VEHICLE FIT- 2020 Polaris RZR PRO XP
- 2020 Polaris RZR PRO XP 4
- Polaris RZR PRO XP 4 Premium 2020
- Polaris RZR PRO XP 4 Ultimate 2020
- Polaris RZR PRO XP Premium 2020
- Polaris RZR PRO XP Ultimate 2020
- Polaris RZR PRO XP 4 Premium 2021
- Polaris RZR PRO XP 4 Sport 2021
- Polaris RZR PRO XP 4 Ultimate 2021
- Polaris RZR PRO XP Premium 2021
- Polaris RZR PRO XP 2021 Sport
- 2021 Polaris RZR PRO XP Ultimate
- 2022 Polaris RZR PRO XP 4 Premium
- 2022 Polaris RZR PRO XP 4 Sport
- 2022 Polaris RZR PRO XP 4 Ultimate
- Polaris RZR PRO XP 4 Ultimate Rockford Fosgate 2022
- Polaris RZR PRO XP Premium 2022
- Polaris R 2022ZR PRO XP Sport
- Polaris RZR PRO XP Ultimate 2022
- Polaris RZR PRO XP Ultimate Rockford Fosgate 2022
- Polaris RZR PRO XP 4 Premium 2023
- Polaris RZR PRO XP 4 Sport 2023
- Polaris RZR PRO XP 4 Ultimate 2023
- Polaris RZR PRO XP Premium 2023
- Polaris RZR PRO XP Sport 2023
- Polaris RZR PRO XP Ultimate 2023
Installation Instructions
discountable, Make_Polaris, Model_RZR PRO XP Color:Black|Ball Joints:No Ball Joints,Ball Joints Preinstalled4.73 (383 reviews)
