Drivetrain
High Lifter Polaris RZR 4 Turbo S 4" Portal Gear Lift 30% Dual Tensioner Version Drivetrain Drivetrain
Polaris RZR 4 Turbo S 4" Portal Gear Lift 30% Dual Idler Version
2003 Polaris UTV Parts, Parts Store,This High Lifter 4-inch Portal Gear Lift is sturdy and ready to take on any challenge. Now designed with a gear configuration that allows two idler gears in the gate box to distribute the load between twice as many teeth on the gears. This doubles the surface area and cuts the stress in half, allowing for more abuse. This kit is for riders looking for torque and power.
High Lift Gate Gear Lifter (each kit includes 4 gate boxes)
What does the double idler gear lift?
- High Lifter improved the gate design by adding a second idler gear in the gearbox
- Double idler gears distribute the load on twice as many teeth on the gear trains, which doubles the surface area and reduces stress by half.
- You get more reliable torque transfer
- If you are using a 40 inch or larger tire, nrp utv parts, pbr utv parts, this is the ideal gear ratio and double idlers are almost a must.
- Stop burning the belts and break as many axles; differenceessential elements; transmission shafts; dive gears…
- Reducing gears extends brake life by needing brakes less often due to greatly improved engine braking
- Even though a lower gear ratio will bring your speedometer closer to a stock reading, utv racing parts, leduc side by side parts, which is still too high a ratio to compensate for the loss of torque caused by the larger tires. If you don't need to run fast, a lower gear will perform better and give you the power you want!
Features:
- Forged Gear Boxes: Tougher than Billets ands cast irons
- Strongest backing plate made
- Advanced sealing with Kevlar fiber seals
- Precision ground stainless steel rotors
- 100% more sealing surface
- Vented gearbox
- 30% speed reduction – Gives you more low-end torque for trail riding
- Power on Demand - More power to the ground with less motor wind-up
- Lift It Up - Gain an additional 4" of lift and improved track width
- Built Rugged - Built with 6061 aluminum and engineered for the toughest terrain you can encounter.
- Excellent Ride – Get all the benefits of extra torque and better performance clearance without compromising factory ride or suspension angles
- Camber Adjustment Shims – Adding or removing shims can adjust camber from -1.25° to +2°.
- Perfect Machining – We guarantee the quality of our product 100%. The kits have been specially designed and machined to fit your ride perfectly.
- Slotted Brake Rotors – Slots cut into the flat metal surface direct gas, heat and water away from the surface of these rotors to improve braking performance
Tyre mounting:
- Largest tire with gate: 33"
- Largest tire with front arm: 35"
Our tire fitting guide shown is a general fitment and is not guaranteed in any way. Tires and lifts vary by manufacturer and tire fitment may be affected by other modifications. Always check your tire brand, UTV bed accessories, side-by-side refrigerator parts, lift and other modifications before making a purchasing decision.
Wheel Requirements:
- 14" or more
- Usi wheels14" must run a 1" spacer
- 14" and 15" cannot exceed 4-1/2" backspacing
- 16" and larger cannot not exceed 5" rear spacing
- 2019 Polaris RZR TURBO XP 4 S
- 2020 Polaris RZR TURBO XP 4 S
- 2020 Polaris RZR TURBO XP 4 S Velocity
- Polaris RZR Turbo S 4 2021
- Polaris RZR Turbo S 4 Velocity 2021
- Polaris RZR Turbo S 4 Lifted Lime 2021
*Yes DOES NOT fit 2 seater models
INSTALLATIONInstructions
, wholesale parts, orb utv parts VRTCFRZR4 discountable, Make_Polaris, Model_RZR Turbo S, Model_RZR XP Turbo4.91 (371 reviews)
