Suspension
High Lifter Rear control arm Polaris Ranger XP 1000 Suspension Suspension
Polaris Ranger XP 1000 Rear Control Arms
Whether you're riding through deep mud or rocky trails, the need for stronger control arms with increased ground clearance is extremely important. Most stock arms are too weak to withstand what you put your bike through and don't have the extra ground clearance needed for rough trails. High Lifter has solved your problem by designing heavy duty control arms, kryptonite UTV parts, aftermarket UTV parts, twice as strong as your stock arms, with the extra ground clearance you need for all terrain and larger tires.
Our arms maximize ground clearance by strategically arching the lower control arms while following the angle of the axle for maximum clearance, vehicle protection axle, Wildcat UTV Parts, Realtree 24V UTV Parts, 8 Passenger UTV, Bass Pro UTV Accessories and Eye Appeal. Don't be fooledby too much arch which exposes your axles to a greater risk of damage. Our precision manufacturing process ensures that each control arm installs exactly like the factory arm. Depending on the model, most kits will have the High Lifter logo precisely cut into the brace.
Installation is made easy with our step-by-step, multi-picture instructions. When installing, UTV brake parts, UTV MX parts, you can use original bushings and ball joints for easy installation. Better yet, 12 volt hondatal utv parts, High Lifter will install your ball joints before shipping. (See our control arms with pre-installed ball joints.)
Always check brake bearings, bushings, ball joints and wear before installation and replace if necessary. We always recommend checking these parts before starting your installation to save time and get back to work.track earlier. Visit the Replacement Parts tab to purchase replacement parts if necessary.
Features:
- 25% larger than average arms - Made from steel 1 1/4" DOM
- Up to 2.5 times the wall thickness of an average stock arm - 0.120" wall thickness
- Lubricators included for most models
- Added ground clearance with bends that maximize axle clearance and protection
- Most powder coat colors available from stock
- Easy to install and maintain
- Limited lifetime warranty
Note: These arms are not tilted back.
FITTING OF THE VEHICLE- 2018 Polaris Ranger 1000 XP
- 2018 Polaris Ranger 1000 XP Northstar
- 2019 Polaris Ranger 1000 XP Crew Northstar
- Polaris Ranger 1000 XP Crew 2019
- Polaris Ranger 1000 XP 2019
- Polaris Ranger 1000 XP Premium 2019
- Polaris Ranger 1000 XP 20th Anniversary Edition 2019
- Polaris Ranger 1000 XP Crew Premium 2019
- Polaris Ranger 1000 XP Crew 20th Anniversary Edition
- Polaris Ranger 1000 2019 XP Northstar
- 2019 Polaris Ranger 1000 XP High Lifter Edition
- 2019 Polaris Ranger 1000 XP Crew High Lifter Edition
- 2020 Polaris Ranger 1000 XP Premium
- Polaris Ranger 1000 XP NorthStar 2020
- Polaris Ranger 1000 XP Texas Edition 2020
- Polaris Ranger 1000 XP High Lift 2020er Edition
- Polaris Ranger 1000 2020
- Polaris Ranger 1000 EPS 2020
- Polaris Ranger 1000 Premium 2020
- Polaris Ranger 1000 XP Crew 2020 Premium
- 2020 Polaris Ranger 1000 XP Crew NorthStar
- 2020 Polaris Ranger 1000 XP Crew Texas Edition
- 2020 Polaris Ranger 1000 XP Crew High Lifter Edition
- Polaris Ranger 1000 Crew 2020
- Polaris Ranger 1000 Crew EPS 2020
- Polaris Ranger 1000 Crew Premium 2020
Instructions
, bmx utv 500 parts manual MCRA-RNG1-B1 discountable, Make_Polaris, Model_Ranger 1000, Model_Ranger XP !000 Color:Black4.62 (372 reviews)
