Suspension
Misfit Garage Can Am X3 Suspension Bolt Kit Suspension Suspension
Can Am X3 Suspension Bolt Kit
odes 170 utv parts, camso utv 4s1 parts,We have finally added a Can-Am to our bolt kit inventory! This works on all years and submodels of Maverick>
This kit was created at the request of our customers who needed the correct bolts to be able to rely on their machines later. You may not notice any problems now, but all these problems are long term and once problems appear, the repair bill to fix them will be more than the cost of this kit!
The problem with OEM bolts is that the rod length is too short With suspension components you always want a bolt rod to pass through both sides of the brackets for that suspension part. Thus putting all the load on the strongest part of the bolt which isthe stem! By not having a bolt shank long enough to pass through both sides of the brackets, this reduces the load on your impacts. on the weakest part of the bolt, this is where the bolt passes from the shank to the thread! Over time this will start to wallow/lie on the side of your mounts that only has wires and will not pass through. Ultimately this creates even more backlash than there was originally and the problems will only get worse from there! Bent bolts, Polaris Ranger utv parts, 2008 Polaris utv parts, bms utv parts, broken bolts, massimo utv parts, yanmar utv parts, bent suspension components, mahindra 1000 utv parts, the list goes on! Don't let this happen to your machine!
The bolts will be longer than stock, this is the only way to get the stem to be the correct length. The bolts can easily be cut if you have a cut-off wheel and grinder.
Includes:
- The 8 shock absorber bolts. Front/Rear Upper and Lower (If you purchase the kit with shock bolts. We offer it without shock bolts for those who have limit straps and already have longer bolts.)
- The 6 outer radius rod bolts. Chasside sis
- All 4 front upper control arm bolts and 2 rear lower arm bolts!
- Both swing arm brackets on the frame.
- The 4 rear knuckle mounts on the swingarms.
- 2 outer tie rod bolts. (Get rid of the cotter pin. With the all-metal top lock nut, it won't get lost if you tighten the bolts properly and use Loctite.)
- Also included are all new coatings of hardened yellow zinc. washers and all metal top lock nuts (not the nyloc nuts like other kits)
NOTE: This kit DOES NOT include bolts which are connected together by a metal plate. (Lower Front Arm Front Bolt. 6 Inside Radius Rods.
TORQUE BOLTS AT 93 ft-lbs
VEHICLE MOUNTINGCan Am Maverick X3
, utv parts australia, gravely utv parts 77200003 discountable, Make_Can Am, Model_X3 Vehicle Year:2017-2021,2022+4.54 (364 reviews)
