Clutching
MTNTK Performance Arctic Cat Wildcat Trail / Sport Vent Hole Clutching Clutching
Arctic Cat Wildcat Trail / Sport Blow Hole
xy300 utv parts, xy 500 utv parts, el paso utv parts, utv gun accessories,With the advent and explosion of UTV sales, transmission system engineering has been pushed to the extreme . Previously designed ATV components were either adopted into newer UTV platforms or slightly modified to meet technical requirements. UTVs weigh more and carry more cargo than you ever thought possible from an ATV platform. The clutches and drive belt appear to be a weak link as the extra load is converted into wasted thermal energy. This waste heat deteriorates drive belts and destroys composite bearing surfaces and parts, leading to increased inefficiency. This loss of efficiency only provides more ways to produce heat and the vicious cycle repeats itself until breakdown. "THE BLOW HOLE" for appo UTVsretains our respected and loved snowmobile product along with its heat-fighting capabilities to increase drivetrain longevity and ultimately your investment. We developed this out of desperation to increase the life of the belts and clutches on the rental machines we used on the sand dunes. In the extreme conditions of sand dunes, it has become common to remove belt covers in a desperate attempt to avoid belt failure. Although removing the cover helps prevent belt failure, the increased contact with sand causes premature clutch wear and failure. That's why we adapted "THE BLOW HOLE" to fit the UTV market. UTVs put extreme loads on their clutches and belt, which generates extreme heat. This heat is your enemy. This leads to pre-wearmalfunction of your clutches and complete belt failure. If you've ever had to change a belt, you know it's the last thing you want to do on the trails or in the sand. "THE BLOW HOLE" for UTVs places a high-efficiency auxiliary fan in the cooling ducts of your clutch housing. It significantly reduces the ultimate temperatures generated in the clutch system and also accelerates the cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, Yanmar UTV Parts, Rhino 700 UTV Performance Parts, UTV 801, Kubota UTV Parts Finder, Bulldog UTV Parts, and no cutting or drilling of OE components.
Features:
- Low amperage draw DC fan (2.0A startup and 1.7A continuous) does not overload the electrical system. The engineis highly resistant to water and dust and designed to perform in adverse conditions.
- The rugged welded aluminum design is tough enough to withstand abuse yet lightweight
- Tires approximately 140 CFM (cubic feet per minute) of air through the clutch ducts improving the OEM clutch fan.
- Air is removed from the clutch housing and installation of the fan does not prevent or interfere with belt changes
- Active ventilation system that expels hot air even at low ground speeds, as opposed to the OEM RPM dependent clutch mounted fan .
- Clutches and belt stay cooler, allowing them to last longer and perform better
- Belt dust and other finer debris are essentially sucked out from the clutch cover area so that the clutches stay cleaner.
- The clutch connectorfactory allows for true plug and play installation. Also allows for quick disconnection for troubleshooting and repair work on the machine
- Arctic Cat Wildcat Sport
- Arctic Cat Wildcat Trail
