Engine
MTNTK Performance Can Am X3 X-MR blow hole Engine Engine
Can Am X3 X-MR Blow Hole
side by side parts online,With the advent and explosion of UTV sales, drivetrain system engineering has been pushed to the extreme. Previously designed ATV components were either adopted into newer UTV platforms or slightly modified to meet technical requirements. UTVs weigh more and carry more cargo than you ever thought possible from an ATV platform. The clutches and drive belt appear to be a weak link as the extra load is converted into wasted thermal energy. This waste heat deteriorates drive belts, camso utv track parts, yamaha rhino 450 utv parts and breaks down composite rolling surfaces and parts, leading to increased inefficiency. This loss of efficiency only provides more ways to produce heat and the vicious cycle repeats itself until breakdown. "THE BLOW HOLE" for thes UTV brings our respected and loved snowmobile product and heat-fighting capabilities to increase drivetrain longevity and ultimately your investment. We developed this from one of It is absolutely necessary to increase the life of the belts and clutches on the rental machines we have used on the sand dunes. In the extreme conditions of sand dunes, it has become common to remove belt covers in a desperate attempt to avoid belt failure. Although removing the cover helps prevent belt failure, the increased contact with sand causes premature clutch wear and failure. That's why we adapted "THE BLOW HOLE" to fit the UTV market. UTVs put extreme loads on their clutches and belt, which generates extreme heat. This heat is your enemy. ThisThis leads to premature wear of your clutches and complete belt failure. If you've ever had to change a belt, you know it's the last thing you want to do on the trails or in the sand. "THE BLOW HOLE" for UTVs places a high-efficiency auxiliary fan in the cooling ducts of your clutch housing. It significantly reduces the ultimate temperatures generated in the clutch system and also accelerates the cooling of the clutch housing when traveling at lower speeds between high-load events. Plug and play with OEM connectors, seth atv/utv parts, bulldog 700 utv parts, discount utv parts, lz150-1 utv parts, utv parts websites, and no cutting or drilling of OE components .
Features:
- Low amperage draw DC fan (2.0 A startup and 1.7 A continuous) does not overload the electrical systemctric.
- The rugged welded aluminum design is tough enough to withstand abuse. but lightweight
- Draws approximately 225 CFM (cubic feet per minute) of air through the clutch ducts, upgrading the OEM clutch fan
- Air is removed from the clutch housing and fan installation does not prevent or otherwise interfere with belt changes.
- Active ventilation system that expels hot air even at low ground speeds, as opposed to the clutch mounted fan depending on the original RPM.
- Clutches and belt stay cooler, allowing them to last longer and perform better.
- Belt dust and other fine debris are essentially vacuumed out of the clutch cove so clutches stay cleaner.
- Factory connector allows for true plug and play installation. Also allows rapid disconnectionfor troubleshooting and repair work on the machine.
- All necessary equipment to install on the machine
Can Am Maverick X3 X MR
INSTALLATION Instructions, UTV accessories for Defender 404FC0018 discountable, Make_Can Am, Model_X34.99 (335 reviews)
