Clutching
MTNTK Performance Polaris RZR 570 blow hole Clutching Clutching
Polaris RZR 570 Blow Hole
Lone Star UTV Parts, FangPower UTV Parts,With the advent and explosion of UTV sales, transmission system engineering has been pushed to the extreme. Previously designed ATV components were either adopted into newer UTV platforms or slightly modified to meet technical requirements. UTVs weigh more and carry more cargo than you ever thought possible from an ATV platform. The clutches and drive belt appear to be a weak link as the extra load is converted into wasted thermal energy. This waste heat deteriorates drive belts, UTV bed accessories and breaks down composite running surfaces and parts, leading to increased inefficiency. This loss of efficiency only provides more ways to produce heat and the vicious cycle repeats itself until breakdown. "THE BLOW HOLE" for UTVs brings our productIt is a respected and appreciated snowmobile and its heat-fighting capabilities to increase the longevity of the transmission and, ultimately, your investment. We developed this out of a desperate need to increase the life of the belts and clutches on the rental machines we used on the sand dunes. In the extreme conditions of sand dunes, it has become common to remove belt covers in a desperate attempt to avoid belt failure. Although removing the cover helps prevent belt failure, the increased contact with sand causes premature clutch wear and failure. That's why we adapted "THE BLOW HOLE" to fit the UTV market. UTVs put extreme loads on their clutches and belt, which generates extreme heat. This heat is your enemy. This leads to premature wear of your gears.scratches, parts online, xinyang 500 utv parts, utv parts catalog and complete belt failure. If you've ever had to change a belt, you know it's the last thing you want to do on the trails or in the sand. "THE BLOW HOLE" for UTVs places a high-efficiency auxiliary fan in the cooling ducts of your clutch housing. It significantly reduces the ultimate temperatures generated in the clutch system and also accelerates cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, Viper UTV parts, Bulldog 300 UTV parts, and no cutting or drilling of stock components.
Features:
- Fan Low amperage draw DC (2.0 A startup and 1.7 A continuous) does not overload the electrical system. The motor is highly resistant to water anddustproof and designed to perform in adverse conditions.
- Rugged welded aluminum design is tough enough to withstand abuse yet lightweight
- Pulls approximately 140 CFM (cubic feet per minute) ) of air through the clutch ducts improving the OEM clutch fan.
- Air is removed from the clutch housing and fan installation does not prevent or interfere not with belt changes
- Active ventilation system that expels hot air even at low ground speeds, unlike the OEM RPM-dependent clutch-mounted fan.
- Clutches and belt stay cooler, allowing them to last longer and perform better.
- Belt dust and other fine debris are essentially vacuumed out of the clutch cover area so that the clutches stay cleaner
- Factory connector allows for true flat installationug and play. Also allows quick disconnect for troubleshooting and repair work on the machine
Polaris RZR 570
INSTALLATION Instructions, wholesale utv parts, parts cub cadet utv 101985 discountable, Make_Polaris, Model_RZR 5704.53 (352 reviews)
