Clutching
MTNTK Performance Polaris RZR XP 900 blow hole Clutching Clutching
Polaris RZR XP 900 Blow Hole
Used UTV Parts,UTVs place extreme loads on their clutches and belt, which generates extreme heat. This heat is your enemy. This leads to premature wear of your clutches, utv parts near me, quality utv parts, utv parts near me, utv parts store near me, 500cc utv parts and complete belt failure . If you've ever had to change a belt, you know it's the last thing you want to do on the trails or in the sand. "THE BLOW HOLE" for UTVs places a high-efficiency auxiliary fan in the cooling ducts of your clutch housing. It significantly reduces the ultimate temperatures generated in the clutch system and also accelerates the cooling of the clutch housing when traveling at lower speeds between high load events. Plug and Play with OEM connectors, and no cuttingor drilling of the original components. With the advent and explosion of UTV sales, drivetrain system engineering has been taken to the extreme. Previously designed ATV components have been adopted into new UTV platforms or have been slightly modified to meet technical requirements. UTVs weigh more and carry more cargo than you ever thought possible from an ATV platform. The clutches and drive belt appear to be a weak link as the extra load is converted into wasted thermal energy. This waste heat deteriorates drive belts, UTV manufacturing parts, Wildcat UTV parts, Polaris Canada UTV parts and breaks down composite bearing surfaces and parts, leading to increased inefficiency. This loss of efficiency only provides more ways to produce heat and the vicious cycle repeats itself juntil the breakdown. "THE BLOW HOLE" for UTVs brings our respected and loved snowmobile product and heat-fighting capabilities to increase drivetrain longevity and ultimately your investment. We developed this product out of a desperate need to increase the life of the belts and clutches on the rental machines we used on the sand dunes. In the extreme conditions of sand dunes, it has become common to remove belt covers in a desperate attempt to prevent belt failure. Although removing the cover helps prevent belt failure, the increased contact with sand causes premature clutch wear and failure. That's why we adapted "THE BLOW HOLE" to fit the UTV market. Fits 2011-2014 Polaris RZR XP 900.
Features:
- Low-power DC fan hasamperage (2.0 amps starting and 1.7 amps continuous) does not exceed taxes. the electrical system. The motor is highly water and dust resistant and designed to operate in adverse conditions.
- The rugged welded aluminum design is tough enough to withstand abuse yet lightweight
- Pulls approximately 140 CFM (cubic feet per minute) of air through the clutch ducts enhancing the OEM clutch fan.
- Air is removed from the clutch housing and installation The fan does not prevent or interfere with belt changes.
- Active ventilation system that expels hot air even at low ground speeds, unlike the RPM-dependent clutch-mounted fan original.
- The clutches and belt stay cool allowing them to last longer and perform better.
- Belt dust and other fine debris are essentially vacuumed out of the the zone of the clutch cover so clutches stay cleaner.
- Factory connector allows for true plug and play installation. Also allows for quick disconnection for troubleshooting and repair work on the machine.
Polaris RZR XP 900
INSTALLATION Instructions discountable, Make_Polaris, Model_RZR XP 9004.56 (355 reviews)
