Helmet
PCI Elite Wired Impact Carbon Air Draft OS20 SA2015 Helmet Helmet Helmet
Elite Wired Impact Carbon Air Draft OS20 SA2015 Helmet
utv parts yard,Impact SA2015 Carbon Fiber Helmet inventory levels change daily and may be out of stock. Contact us for more details or place your order online and we will get back to you with delivery times.
Made from the lightest carbon fiber material Impacts, Farm Pro Raider UTV parts , from the Hisun 500 UTV Parts Manual, the Impact Carbon Fiber Air Draft OS20™ provides improved ride comfort and reduces fatigue and neck strain with its lightweight design. The off-center, left-positioned air inlet provides additional clearance in the cockpit while the air port is angled 20 degrees for easy movement with the fresh air hose. Cooling comfort and cool air are pumped through three individual air channels routed to direct air over the visor, further reducing fogging and contaminants that interfere with the visor.e visual field. The unique location of the air channels also prevents the fresh air system from "opening" the microphone and interfering with the communications stem. Featuring a large eye port, the Air Draft OS20™ provides an exceptional range of peripheral vision while the wicker design provides aerodynamic downforce to reduce the potential for helmet "lift" at high speeds. Additional features such as an integrated chin baffle and covered Nomex® eye port seal virtually eliminate dust and contaminants from entering the interior of the helmet while providing additional thermal protection. The Air Draft OS20™ also includes removable cheek pads. Made from Impact's "Intelligent Gray Matter" inner liner and covered in flame-retardant Nomex® soft-knit fabrics, the Carbon Fiber Air Draft OS20™ is the helmet of choice for Baja racing adventures.
Features:
- Made in the USA!
- SNELL SA 2015
- Wide, low eye port for a better field of vision and a superb view of the dashboard.
- li>
- Constructed from 100% carbon fiber
- Air intake offset to 20 for a additional vehicle roof clearance. Connect our RaceAir hose and cool air is pumped through three individual air channels to the fog-reducing shield.
- Velcro installed for helmet skirt (sold separately)
- PCI Custom Wired. Large, high-power drivers, water-resistant H2NO pigtail and ear plug.
- All SA2015 and SA2020 headsets have a 6mm backplate installed for easy installation. installation of head and neck restraint hardware.
- Helmet weight: 3.45 lbs Wired (without earcups) with Race Air.
As for all personal safety devices, utv partsnear me, Coleman utv parts, utv what is it, utv parts manufacturer, helmet fit is vitally important and can increase the risk of injury if not properly adjusted. Carefully measure the head about an inch above the eyebrows on a point on the back of the head that gives the greatest measurement. Remember: helmets "crumble" with use. It is important that the helmet is as tight as possible.
Please see the tables below for more information.elm fitting. If you don't know your hat size, please take a fabric measuring tape and measure around the circumference of your head, just above your eyebrow line.
| Height | Centimeter | Hat size | Inches |
| XS | 53-54 | 6 1/2 - 6 7 /8 | 20 5/8- 21 |
| S | 55-56 | 6 7/ 8 - 7 | 21 5/ 8 - 22 |
| M | 57-58 | 7 1 /8 - 7 1/4 | 22 1/2 - 22 3/4 |
| L | 59-60 | 7 3/8 - 7 1/ 2 | 23 1/4 - 25 5/8 |
| XL | 61-62 | 7 5/8 - 7 3/4 | 24 - 24 1/2 |
