Engine
S&B Polaris RZR Pro R Air Filter Engine Engine
Polaris RZR Pro R Air Filter
PROTECT YOUR ENGINE! Huge S&B Parts, Arctic Cat UTV, Dry Cleanable Filter Flows BestUsing proprietary dry synthetic media, Vitacci 650 UTV Parts, our Pro R Filter flows 1.60% better than
AIR FLOW:
The S&B UTV filter for the Polaris Pro R flows 1.60% better than the stock air filter.
Brand | Restriction " H2O | % flows better than stock |
---|---|---|
S&B | 2.50 | 1.60% |
Polaris Stock | 2.46 | Baseline |
EFFICIENCY:
All UTV Air Filters below offer a high level of protection.
Brand | ISO A2 Fine Dust | |
---|---|---|
S&B | 99.97% | |
Polaris Stock | 99.91% |
CAPACITY:
The amount of dust retained beforethe air filter needs to be replaced or serviced.
Brand | Grams | % Better than stock |
---|---|---|
S&B | 116 | -64.77% |
Polaris Stock | 330.10 | Baseline |
*Testing conducted in an air-conditioned laboratory, utv parts jacksonville florida, utv machine parts, in accordance with ISO 5011 filtration testing standard. Test results after cleaning vary from published data.
MAINTENANCE OF THE FILTER
CLEANING THIS FILTER IS AS EASY AS 1, 2, 3
If you don't have our particle separator installed, then your filter will start to look like this after a few trips protecting your engine. Don't worry though, ATV UTV Parts & Accessories, UTV Bed Accessories, our new RZR filter is super easy to clean. Simply follow the steps below to give a newlife to your dirty filter. If the filter media or rubber appears damaged, do not reuse it.
STEP 1
First, be sure to wear protective eyewear throughout the process cleaning. Remove the dirty air filter from the UTV's air box and lightly tap the top several times on hard duty to remove any debris, being careful not to bend the cage or creases.
STEP 2
Blow the filter from the inside out using the nozzle no more than 1" from the support. Continue to move the nozzle taking care not to concentrate it on one area specific Use an OSHA approved regulator at no more than 30 psi.
STEP 3
Use the nozzle to blow the outside of the filter at an angle to remove. any large debris that was not removed in steps 1 and 2. Be careful not to blow the debris back into the holder Then blow inwards again.outside.
OPTIONAL STEPS
If you want to maximize the airflow of your filter, we recommend following the following steps every other time during maintenance of your filter.
STEP 4
Use a standard garden hose set to 75% of its maximum strength and wash the filter from the inside out.
p>
STEP 5
Wash the exterior of the filter to remove any remaining debris. Repeat steps 4 and 4.5 until the support returns to its original white color. Allow the filter to dry before use. A small fan can be used to speed up the process. Do not use hot air.
You should discard the filter after servicing it 10 times to ensure your engine is properly protected. Before reinstalling your air filter, carefully inspect the cage, pleats, and silicone rubber for damage. If you notice damage to the cage, plily or rubber, viper utv parts DOOR-P-PROR-01 Make_Polaris, Model_RZR PRO R4.89 (325 reviews)