Tools
PRP Polaris RZR Roll-Up Tool Bag Tools Tools
Polaris RZR Roll-Up Tool Bag
PRP's RZR Roll-Up Tool Kit provides everything you need to repair your RZR on the trail. This 35-piece kit includes a selection of high-quality ratchets, sockets, wrenches, extensions, pliers and a ball peen hammer (for when things get really fun). We've hand-picked the tools most needed when working on a Polaris RZR – So you only have the essentials you really need. Below, we've listed all the tools included, along with a handy guide to the most common uses for each tool. Each tool also includes a limited lifetime warranty.
The roll-up bag helps keep everything neat and organized. It features dedicated pouches for all the tools included in the kit, as well as a zippered pocket to hold sockets and any other tools you want to carry with you. The bag is made from an extremely durable twill material. It features sturdy buckles and an easy-to-carry grab handle. It can be mounted or stored safely inside the vehicle. The roll-up style bag makes it quick and easy to take out of the vehicle when you need it, and the tools inside don't make noise as they bounce around on the trails.
This kit is also comes with PRP's innovative RZR belt changing tool. This tool makes it quick and easy to change the belt on your Polaris RZR 570, Intimidator UTV parts, 800, XP 900 and XP 1000. Rather than using a wrench to hold the secondary clutch open, our simple tool "locks" the belt clutch open. all the time. Simply insert the tool, tighten the bolt and leave it in place while you change the belt. It allows you to change a belt in seconds rather than minutes.
For the Turbo, Turbo S, RS1 and PRO XP, we have included a bolt1/4" hardened clutch that accomplishes the same task on newer clutches. Rather than using the L-shaped clutch wrench included in the original tool kit (where you have to turn it to the hand a thousand times), you can simply insert this bolt and use a ratchet (or impact) to tighten it in seconds. The bolt holds the secondary clutch open, so you can change the belt quickly and easily.
Don't get caught out on the trail unprepared The PRP Roll-Up Tool Kit has everything you need to get your RZR started!
Features:
Includes:
- (1) Flat Head Screwdriver – Hose Clamps
- (1) Grooving Pliers
- (1) Large Head Cutting Pliers
- (1) Needle-nose pliers – When putting things where it's hard to reach
- (1) Adjustable wrench – Used on almost everything
- (1 ) Ball Peen Hammer – If Something Won’t Fit…Adapt It
- (1) 1/4″ ratchet
- (1) 3/8″ ratchet
- (1) 1/4″ extension bar
- (1) 3/8″ extension bar
- (1) 1/4 flexible extension bar ″
- (1) T25 x 1/4″ – Door skins, moab utv parts, buss bar, CV trunk guard, ECU
- (1) T27 x 1/4 ″ – Overflow bottle, EPS lid, seat adjustment
- (1) T40 x 1/4″ – Bodywork, hood
- (1) 3/8″ adapter to 1/2″
- (1) Spark plug socket 5/8″
- (1) 8 mm Spark plug socketAllen head x 3/8″ – Drain and fill differential, drain and fill trans
- (1) Socket 8 mm x 1/4″ – CVT cover, side housing
- (1) 10mm x 3/8″ Socket – Skid Plate, Ground Wire, Starter Solenoid, Shift Sensor, Heat Shield, UTV Edge Parts, Rad Bracket, Bus Bar
- (1) 11mm x 3/8″ Socket – PRP Belt Change Tool and Bolt, Various Aftermarket Products
- (1) 13mm x 3/8″ Socket – Frame Bracket, Bracket stabilizer bar, front fascia, brake line, steering shaft, battery cable, am utv parts box, external water pump, pedal bracket, stone guard
- (1) socket 15 mm x 3/ 8″ – Ball joint pinch bolts, steering shaft, buffalo utv parts, EPS, utv clutch parts, cage, harness bar, rear caliper brakes, xinyang 500 utv parts, utv bed accessories, rear hub, stabilizer bar, remove secondary clutch
- (1)16mm x 3/8″ Socket – Differential Bracket, Front Caliper Bracket, Seat Belts
- (1) 17mm x 3/8″ Socket – Steering Shaft, Turbo Oil Line
- (1) 18mm x 3/8″ Socket – Shocks, A-arms, Swingarm, Frame Bracket, Radius Rods, Tie Rod, Differential
- (1) 19mm x 3/8″ Socket – Turbo Oil Line, Wheel Nuts, Seat Belts
- (1) 21mm x 3/8″ Socket – Primary Clutch Bolt
- (1) 21mm x 3/8″ Socket – Primary Clutch Bolt li>
- (1) 27mm x 1/2″ Socket – Axle Nut
- (1) 8mm Combination Wrench – CVT Cover, Side Housing
- (1) 10mm Combination Wrench – Skid Plate, Ground Wire, Starter Solenoid, Shift Sensor, Heat Shield, Radiator Bracket, Bus Bar
- (1) 13mm Combination Wrench mm – Frame support, xy 300 utv parts, stabilizer bar bracket, front fairing, brake line, realtree xd utv parts 24v, steering shaft, steering cablebattery, external water pump, pedal assembly, stone guard
- (1) 15mm combination wrench – Ball joint pinch bolts, steering shaft, EPS, cage, harness bar, caliper brakes rear, rear hub, stabilizer bar
- (1) 17 mm combination wrench – Steering shaft, turbo oil line
- (1) 18 mm combination wrench – Shock absorbers, A- swingarm, frame bracket, spoke rods, tie rod, differential
- (1) PRP Belt Changing Tool – (RZR 570 800 900,1000) Insert the tool into the secondary clutch and tighten the bolt with a ratchet (or impact gun). The tool holds the clutch open and allows you to change a belt in seconds.
- (1) Belt Change Bolt – (RZR Turbo, Turbo S, RS1, PRO XP) Insert the bolt into the secondary clutch, and tighten it with a ratchet (or impact gun). The bolt keeps the clutch open and allows you to change a yardking in seconds.
- Polaris RZR 570
- Polaris RZR 800
- Polaris RZR 900
- Polaris RZR Pro XP
- Polaris RZR RS1
- Polaris RZR S 1000
- Polaris RZR S 900
- Polaris RZR Turbo S
- Polaris RZR XP 1000
- Polaris RZR XP 900
- Polaris RZR XP Turbo
