Suspension
SuperATV A-arms offset forward Polaris Ranger 1000 2" Suspension Suspension
Polaris Ranger 1000 2" Forward Offset A-Arms
pieces side by side leduc,2" Forward Shift You get on your Ranger to have as much fun as possible. And for you, fun means going big and riding hard. If you want the biggest Ranger in the park, you need SuperATV's 2-inch Forward Offset A-Arms installed on your Polaris Ranger 1000. They are designed for pure performance and added stability. Plus, they have room for monster tires so you can really go wild. More clearance = more fun Carefully positioned tube elbows give you 1.5 inches of additional ground clearance. The 2-inch forward offset gives you crazy tire clearance: you have room for much bigger tires than stock. This offset also gives you a longer wheelbase and more stability, which will make it easier for you to keep your foot on the wheels.third experts. Tough to Last These A-arms are designed to be used day in and day out. They use 1.25" diameter steel tubing for added strength. The UV-resistant powder coating prevents corrosion and it looks great. Speaking of looks, you're sure to turn heads with these beasts installed. From the design to the high clearance elbows to the powder coating, they look simply awesome. And they're backed by a lifetime warranty. for easy installation The chromoly pivot blocks on these arms are adjustable, so you can have the perfect camber even if you add lift or a lot of weight. But don't worry, we adjust them to specifications. factory before shipping them Simply open the box, uncover 800 utv parts, install them, and ride with one.Heavy duty tie rod kit. A heavy-duty set of offset A-arms requires a matching heavy-duty tie rod kit. And this kit is no exception. These crimped tie rods take advantage of chromoly tie rod ends so they can handle rough riding and rough terrain. They are designed to get dirty and accompany you in any situation. Let SuperATV Do the Job – Pre-Assembly Available! Want to spend more time on the trail and less time in the garage? Buy a set of SuperATV ball joints with your A-arms and we'll install them for you for free! We save you time and money so you can get back to doing what you love. NOTE: You must reuse your original ball joints if you do not select a pre-installed ball joint at checkout. Heavy Duty Ball Joints Our heavy duty ball joints are designed in afor ultimate performance and convenience. Whether you're doing flips or chasing hills, our proprietary blend of 4340 VAR hardened steel and zinc plating means this ball head can handle it. Our heavy-duty ball joints also come with easily accessible grease fittings and an adjustable design. Extensive lab and field testing shows our heavy-duty ball joints can withstand double the pressure of an OEM ball joint! Super Duty 300M Ball Joints We have taken the strongest ball joint material on the market (300M grade steel) and combined it with our superior engine design. We seek to make the strongest ball joint on the market. It comes with an easily accessible grease fitting and an adjustable steel-on-steel design, making your ball joints easier to maintain and more flexible. At 2.25 times stronger than OE, you won't find a better ball joint. KIT CINCLUDES:- Front Upper and Lower Offset A-Arms
- Tie Stop Kit
- Heavy Duty Tie Rod Kit
- Front and Rear anti-shock stops
- All hardware and instructions
Features:
- Adds 2" of dforward eport
- Run up to a 34" tire
- Uses 1.25" tubes
- Adjustable pivot block for adjustability full camber
- Uses original A-arm bushings
- UV resistant powder coat finish
- Easy to install
- Covered backed by a lifetime warranty
Heavy Duty Tie Rod Kit Features:
- Robust Crimped Design
- Tie Tie Rod Ends made from 4130 chromoly
- Precision blend of materials and heat treatment
- 14mm tie rod ends compared to OEM 12mm
- Polaris Ranger 1000: 2020+
- Polaris Ranger 1000 Crew: 2020+
- AA-P- RAN1K-2- HC - Instructions
- AA-P-RAN1K2-001 - Instructions
