Sale!

SuperATV Can Am Defender HD10 Atlas Pro 1.5" Rear Offset A-Arms Suspension

$116

SKU: SuperATV Can Am Defender HD10 Atlas Pro 1.5" Rear Offset A-Arms Suspension
Category:

Suspension

SuperATV Can Am Defender HD10 Atlas Pro 1.5" Rear Offset A-Arms Suspension Suspension

Can Am Defender HD10 Atlas Pro 1.5" Rear Offset A-Arms

Do more with more suspension Driving over rough terrain is one thing. Pushing your Defender to its limits on rough terrain is another. Can your stock A-arms keep up? We're familiar with our Atlas Pro 1.5-inch rear offset A-arms. Their tube is bigger and better, measuring 1.5" in diameter. They are also 0.5" larger than stock and 0.25" larger than our standard A-arms. They amplify your clearance, giving your rig look big, bad and powerful Plus they come with a 1.5 inch offset And if you want to run 31 inch tires all around you can add our offset A-arms. 2 inch front. Atlas Pro tubes are badass. These Atlas Pro A-Arms are big and beefy. They're the largest A-arms we've ever made.will turn heads. And while you're on the trail, it gives you the strength you need and the reliability you count on. Half an inch larger than stock may not seem like a lot, but the difference is huge when it comes to A-arms. Additionally, they are finished with a V-resistant powder coating to increase durability and corrosion resistance. Rear offset = more stability The design of these Can-Am Defender HD10 control arms gives you additional ground clearance of 1.5", allowing you to ride over stumps and rocks that you would pass up in the past. And they come with a 1.5" rear offset 9 seater UTV, adding length to your wheelbase by moving the ball joint 1.5" rearward. The offset allows you to run tires up to 31" without adding a lift kit. The trail is at your mercy with bigger tires, greaterground clearance and an offset of 1.5 inches. We are so confident in our A-arms that we sell them with a lifetime warranty. So ride the way you want, UTV parts sales, Coleman UTV parts, knowing we have your back. Adjustable Pivot Blocks Our high clearance A-arms also come with adjustable pivot blocks, giving you the ability to change your camber. It is important when adding a lift kit or larger tires that you pay attention to your camber to eliminate premature wear on your tires. To avoid any stress, we've also pre-adjusted your pivot blocks to match your machine's original specifications, so you don't have to fiddle with them if you don't want to.

WARNING : This product can impact machine operation. The customer and/or user is responsible for ensuring that this product is compatible withits machine as currently configured, properly installed, and understands any impact this product has or may have on the operation of the machine.⚠California Proposition 65 Warning⚠WARNING: This product may contain a chemical recognized by the State of California may cause cancer, birth defects or other reproductive harm.

Features:

  • Adds 1.5" of rear offset
  • Fit tires up to 31 inches
  • Made with 1.5 inch diameter tubes
    • 0.5 inch larger than stock
    • 0.25 inches larger than our standard high tires -Rear A-arms offset 2 inches
  • Adjustable pivot blocks for full adjustability camber
  • Uses stock A-arm bushings
  • UV resistant powder coat top coat finish
  • Easy to install
  • Neckgreen with a lifetime warranty
VEHICLE FITMENT
  • Can-Am Defender HD 10 DPS: 2020 +
  • Can-Am Defender HD 10 XT: 2020+
  • Can-Am Defender MAX HD 10 DPS: 2020+
  • Can-Am Defender MAX HD 10 XT: 2020+
  • Can-Am Defender 6x6 DPS: 2020+
  • Can-Am Defender 6x6 XT: 2020+
  • Can-Am Defender Pro DPS: 2020+
  • Can-Am Defender Pro XT: 2020+

NOTE: Does NOT fit LTD, utv parts, utv parts manufacturer, ebay polaris utv parts, Nearby UTV Parts & Accessories, Lonestar or XMR models.

INSTALLATION
  • Instructions - AA-CA-DEF-R-OHC
  • Instructions - AA-CA-DEF- 1.5-R
, UTV bed accessories AA-CA-DEF-2-002-02 Make_Can Am, Model_Defender Vehicle Model:DPS,XT,Pro DPS,Pro XT|Vehicle Year:2020+4.74 (384 reviews)