Suspension
SuperATV Kawasaki Mule Pro High Clearance 1.5" Offset A-Arms Suspension Suspension
Kawasaki Mule Pro High Clearance 1.5" Offset A-Arms
Get the most out of your suspensionWhether it's a quick evening outing or a long weekend adventure, the last thing you want is for that trip to be cut short because your weak A-arms were damaged. Luckily, SuperATV has what it takes to keep your Kawasaki Mule Pro strong on the roughest trails and rock gardens. Our high clearance 1.5 inch front offset A-arms are made with 25% larger tubes than stock Yanmar UTV parts, making them more reliable. You also get more stability and camber adjustability, providing the ultimate UTV suspension upgrade. Extra clearance + forward offset = more fun. The unique curved design of these A-arms gives you 1.5" of additional ground clearance, allowing you to navigate directly over obstacles used to let you hang up. These A-armsres also feature a 1.5-inch forward offset. By moving the ball joint 1.5 inches forward, you extend the length of your wheelbase. This small change to your suspension gives you more stability over large rocks and logs. A forward offset also allows you to use larger tires without adding a lift kit. Imagine all the fun you can have with a longer wheelbase, bigger tires, Phoenix UTV Parts, 2004 Polaris UTV Parts, Realtree XD UTV 24V Replacement Parts, 700 UTV Parts and Extra Ground Clearance . Better materials, smarter design. The stylish BMX UTV. 500 parts and the tubular design of these control arms give your Kawasaki Mule Pro a downright awesome look. But they also blow all other A-arms out of the water in terms of strength. So we started with 1.25 inch tubes larger than stock,then we powder coated them for durability and longevity. Our ball housings and swivel blocks are made from high strength chromoly alloy steel. To make your life easier, we also include pre-installed UHMW bushings. UHMW is almost indestructible and virtually frictionless. They are self-lubricating, so they get smoother the longer you ride. To show how confident they are in the materials and design behind our high clearance A-arms, we sell them with a lifetime warranty. Includes heavy-duty Z-bend tie rods. We include heavy-duty Z-bend tie rods and a chromoly steel inner ball and socket in this kit. Our rods are made from 3/4" solid steel for extreme strength. They are designed to fill the gap caused by the extra 1.5" offset so you get total controltal reliability of your UTV in all situations. Industry-leading Adjustable Pivot Blocks Our high clearance A-arms also come with industry-leading adjustable pivot blocks, allowing you to fine-tune your alignment and maintain perfect camber as needed. Having full control over your camber eliminates the premature tire wear associated with adding a lift kit or larger tires, keeping you riding longer. Don't want to play with those pivot blocks? No need! We make sure they are pre-adjusted to stock specifications right out of the box, so you don't have to make any adjustments unless you want to.Learn more about what amber is , how it affects your driving and how to adjust it perfectly. NOTE: You must reuse your stock ball joints if you do not select pre-assembly.
Features:
- Adds 1.5" of offsetforward ge
- 1.25" pipe
- Adjustable lower pivot blocks for full camber adjustment
- Includes high quality UHMW bushings at no additional cost
- UV resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
Includes:
- (4) A-arms offset forward 1.5"
- (2) Z-curved tie rods
- (2) ) Chromoly steel balls and bushings
- (2) Tie rod boot with zip ties
- Steering stop kit
- Brake line clips
- All hardware and instructions
| Configuration with A-arms offset forward by 1 .5" | Maximum tire size | |
| 1.5" front offset A-arms only | 28" | td>|
| 1.5" front offset A-arms and 1.5" rear offset A-arms | 30" arm | |
| Front and rear offset with original Bumper | 29" | |
| Front and rear offset with SATV bumper | td> | 26" |
| Front and rear offset with 2" lift | 30" | |
| Front and rear offset with 2" lift and stock bumper | 30" | |
| Front and rear offset with 2" lift " and bumper SATV | 30" |
WARNING: This product may have an impact on the operation of the machine. The customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed and understands any impact this product has or may have on the operation of the machine. ⚠ California Proposition 65 Warning ⚠ WARNING: This product may contain a chemical known to the State of California to cause cancer, birth defects ou other reproduction problems.
VEHICLE FITMENT- Kawasaki Mule Pro DX: 2016-2023
- Kawasaki Mule Pro DXT: 2016-2023
- Kawasaki Mule Pro FX: 2016-2023
- Kawasaki Mule Pro FX 1000: 2024+
- Kawasaki Mule Pro FXT: 2015-2023
- Kawasaki Mule Pro FXT 1000: 2024+
- Kawasaki Mule Pro FXR: 2018-2023
- Kawasaki Mule Pro FXR 1000: 2024+
- Kawasaki Mule Pro FXR 1000: 2024+
- li>
- Kawasaki Mule Pro FXT Ranch Edition: 2016-2023
NOTE: 1" wheel spacer required if using stock wheels
INSTALLATION- AA- K-MULE-FXT-1.5-HC - Instructions
- Instructions - AA-K-MULEFXT-OHC
