Steering
SuperATV Polaris General 1000 RackBoss 2.0 Rack and Pinion Steering Steering
Polaris General 1000 RackBoss 2.0 Rack and Pinion
RackBoss 2.0 is more durable Your Polaris General likes to throw its weight around, but keeping the beast under control wears out your steering rack. Eventually, your steering becomes less responsive and there's nothing you can do to stop it. This is where RackBoss 2.0 comes in. It's built differently with our X24 technology: a unique dual-ring design you can't find anywhere else. So install the RackBoss 2.0 rack and pinion from SuperATV on your Polaris General 1000. With it, you can use bigger tires, 700 utv motorcycle parts, tackle dangerous terrain, and ride with confidence wherever you go. With 50% less wear than the stock Intimidator UTV parts catalog, your steering won't get sloppy anytime soon. Minimizes wear with our double bushing design. We use a double PTFE bushing design to prevent wear and tear on you. used to it. Thanks to our X2 technology4, which uses heavy-duty bushings on both ends of the rack, RackBoss 2.0 can power larger hits with larger tires without having sloppy steering. You get like-new operation that lasts longer than any other General 1000 steering rack. Plus, the built-in grease fittings help flush out any dirt that can get in when you push hard through mud or dirt. 'water. This is only possible with RackBoss 2.0. Solid Steel Bar Tie RodsSolid steel bar tie rods give you the rugged strength you need to ride over rough terrain. They're great for spinning big tires up hills and navigating boulder fields. The 1" diameter steel rod is paired with heavy-duty tie rod ends: 3/4" outer tie rods and rebuildable inner tie rods that use 3/4" rod threads and 1/8" threads.16 mm rack. All that strength lets you go wild.Pressed Tube Steering StemsOur pressed tube steel steering stems are lightweight but strong. Our crimped design greatly improves the strength of the 7/8" diameter tube. They feature 16mm inner ball joints and bushings as well as 14mm outer tie rod ends to ensure weak points are as strong as possible They are perfect for tIf you don't need all the benefits of a RackBoss 2.0, UTV Parts Dispensers, Textron UTV Parts, you can dial it back to our original, more traditional RackBoss 1.0. the same sturdy housing but does not include the additional PTFE bushing. Our RackBoss 1.0 rack and pinion comes with stamped steel tubes that are stronger than stock and perfect for casual riders looking for an upgrade. level. It is equipped withe our heavy-duty 14mm inner and outer tie rod ends so you can ride harder without worry. Patent No. 11,345,393RackBoss 1.0 stamped steering stem | RackBoss 2.0 stamped steering stem | Solid steel stem RackBoss 2.0 | |
Price | $349.95 | $399.95 | $499.95 |
X24 Tech Dual Ring Design | ✔ | ✔ | |
Tie rod material | Steel tube | Steel tube | Solid Steel Bar |
Inside diameter of ball and socket thread | 14 mm | 14 mm rod threads, 16 mm rack threads | 3/4" rod threads, 16mm rack threads |
Tie Rod End Thread Outer Diameter | 14mm | 14 mm | 3/4" |
Graisable | ✔ | ✔ | |
Inner boots | ✔ | ✔ | ✔ |
Steering Stop Kit | ✔ | ✔ | ✔ |
Misalignment bushings, tie rod studs, buffalo utv parts, lone star utv parts and hardware | ✔ | ✔ | ✔ |
WARNING: This product may have an impact on the operation of the machine. The customer and/or user are responsible for ensuring that this product is compatible with their machine as currently configured, eBay Polaris UTV Parts, properly installed.amaha utv parts and accessories, and understands any impact this product has or could have on the operation of the machine.⚠ Proposal Warning65 of California ⚠WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Features:
RackBoss 2.0 Features:
- Double PTFE Bushings:
- Designed with X24 Tech
- Prevents wear
- Reduces slope
- Improves overall durability
- Use of solid steel tie rods :
- 3/4" outer tie rod ends
- Rebuildable inner tie rod ends that use 3/4" rod threads and threads 16mm Tie Rod Ends
- Using Crimped Tube Tie Rods:
- 14mm Outer Tie Rod Ends
- Ends rebuildable inner tie rod threads that use 14mm rod threads and 14mm rack threads16 mm
- 65% larger housing than original
- More than 50% less wear than original after 15,000 cycles
- Rack Gear Lubricator
RackBoss 1.0 Features:
- Uses a single PTFE bushing
- Housing 65% larger than stock
- Less wear than stock
- Uses steel crimped tie rods
- Inner Tie Rod Ends and outer 14mm
- Includes all hardware and instructions
- Polaris General: 2016+
- Polaris General 4: 2017+
Replaces OEM part #: 1824349 and 1823994. NOTES:
- Does not fit Polaris General XP 1000: 2020+
- Does not fit Polaris General XP 4 1000: 2020+
Instructions
DHT-X-GEN1-R Make_Polaris, Model_General Style:Steel Swaged Tube,Solid Steel Bar4.67 (455 reviews)