Bumpers

SuperATV Polaris Ranger XP 900 RackBoss 2.0 Heavy Duty Rack and Pinion Bumpers Bumpers

Polaris Ranger XP 900 RackBoss 2.0 Heavy Duty Rack and Pinion

mule 3010 utv parts, RackBoss 2.0 is the best rack we've ever made. The more abuse you put your Ranger, used utv atv parts, llc atv/utv parts through, the less responsive your steering will be. Support your steering by upgrading to the Polaris Ranger XP 900 RackBoss 2.0 rack and pinion from SuperATV. This is an upgraded version of our original RackBoss that uses X24 Technology, a unique dual-ring design that reduces wear by over 50%. It's designed for big tires and tough terrain that would sideline most rigs. Improved durability with a double ring design. RackBoss 2.0 removes almost all unwanted internal play using our dual X24 ring design. With heavy-duty PTFE bushings positioned at both ends of the rack, the rack gear and tension spring are almost stationary. Without additional play, you can ride hardert with larger utv parts, utv accessory ideas, heavier upgrades and still see less wear than a stock Honda 1000R steering rack. This durability is further enhanced with the inclusion of an oiler which facilitates its operation. Stamped Tube Tie RodsThese pressed steel tube tie rods are lightweight but super strong. The flared and crimped design increases the strength of the 7/8" diameter tube. They are also reinforced with better tie rod ends. They have huge 16mm rack threads and 14mm rod threads that make them the strongest in the industry. They will keep you on track where others fail. Solid Steel Steering Stems Our solid steel steering stems are made with a 1" diameter bar and matched. to our industry-leading chromoly tie rod ends. Our Heim uti joint endsRead massive 3/4" threads to make them as strong as possible, and our rebuildable ball joints and inner bushings have 16mm rack threads to add durability. With all that strength, you can ride better and longer than never Patent #11,345,393

WARNING: This product may impact the operation of the machine. The customer and/or user is responsible for ensuring that this product is compatible with their machine as-is. 'it is currently configured, properly installed, and understands any impact this product has or may have on the operation of the machine.⚠ California Proposition 65 Warning⚠ WARNING: This product may contain a state-recognized chemical of California to cause cancer, birth defects, or other reproductive harm.

Features:

Heavy duty PTFE double rings:

Designues with tie rods available:

Stamped tube
Solid steel bar

Use of solid steel tie rods:

3/4" outer tie rod ends
Rebuildable inner tie rod ends that use 3/4" rod threads and 16mm rack threads

Crimped tube tie rod ends use:

14mm outer tie rod ends
Rebuildable inner tie rod ends using 14mm rod threads 3/4" and 16mm rack threads

65% larger housing than stock
Over 50% less wear than stock OEM After 15, Hart Cart UTV Parts 300, Seth ATV/UTV Parts, Western ImPact UTV Plow Parts, UTV Parts, Labor Day Sale, Napa UTV Parts, 000 Cyclesli>
Grease fitting for rack gears

Polaris Ranger XP 900: 2013-2019
Polaris Ranger XP 900 High Lifter Edition: 2016

Instructions - SDRP-P-RAN900
HDRP- 1-34-002 - Instructions

4.78

535