Steering
SuperATV Polaris RZR XP 900 RackBoss 2.0 Rack and Pinion Steering Steering
Polaris RZR XP 900 RackBoss 2.0 Rack & Pinion
RackBoss 2.0 reinvented the rack The destiny of every rack is to wear out over time, become sloppy, and make your steering more responsive . I feel bad. Everything changes with RackBoss 2.0. It's an evolution of our original RackBoss and designed to be the strongest, most durable rack on the market. It uses X24 Tech, a dual bushing design that reduces wear by over 50% compared to stock. You can't find this kind of improvement anywhere else. Install SuperATV's RackBoss 2.0 rack and pinion on your Polaris RZR XP 900 so you can spin massive tires over dangerous terrain. No matter how intense or long your ride, this support keeps you in control. Less wear thanks to our double ring design. What makes RackBoss 2.0 so effective at preventing slopes? It is designed with X24 Tech, PTFE ro bushingsbusts at both ends of the rack which eliminate play from internal components. Reducing backlash also keeps the tension spring almost stationary. With little to no unintended internal movement, this RZR 900 steering rack can spin massive tires during heavy hauls and hard hits while remaining in like-new condition for years longer than the next best rack. And with the built-in grease fitting, you can pass fresh grease through after getting deep into mud or water. Solid Steel Bar Tie Rods Our solid steel bar tie rods are large and sturdy for the reliability you need. They're made with 1" diameter steel bars that are paired with larger, higher quality tie rods you'll love: 3/4" outer joint tie rods and rebuildable inside tie rods that use 3/4" threads. 3/4" rod and a rackth 16mm. son. Overall, they're built for hard hits, big tires, side-by-side refrigerator parts, close-quarters UTV accessories, and wild rides. Looking for a more traditional medium? If you don't need all the benefits of a RackBoss 2.0, you can dial it back to our original, more traditional RackBoss 1.0. It uses the same heavy duty housing but does not include the additional PTF E socket. Our RackBoss 1.0 rack and pinion comes with stamped steel tubes that are stronger than stock and perfect for casual riders looking for an upgrade level. It features our heavy-duty 14mm inner and outer tie rod ends so you can ride harder without worry. Patent #11, Z-Parts, Lake Havasu UTV Parts, 345,393| RackBoss 1.0 Crimped Tie Rod | Solid Steel Tie Rod RackBoss 2.0 | |
| Price | $349.95 | $499.95 |
| X24 Tech Double Bushing Design | ✔ | |
| Tie Rod Material | Steel tube | Solid steel bar |
| Inside diameter of ball and socket thread | 14mm | 3/4" Rod Threads, Coleman UTV Parts, 16mm Rack Threads |
| Tie Tie Rod End Thread Outer Diameter | 14 mm | 3/4" |
| Greasable | ✔ | |
| Inner boots | ✔ | ✔ |
| Steering stop kit | ✔ | ✔ |
| Misalignment bushings, tie rod studs, tusk utv parts and hardware | ✔ | ✔ |
RackBoss 2.0 Features:
- Double PTFE Bushings:
- Designed with X24 Technology
- Prevents wear
- Reduces slope
- Improves overall durability
- Use of solid steel tie rods:
- 3/4" outer tie rod ends
- Rebuildable inner tie rod ends that use 3/4" rod threads and 16 rack threads mm
- 65% larger housing than OEM
- Over 50% less wear than OEM after 15,000 cycles
- Rack gear lubricator
- Polaris RZR XP 900: 2011-2014
- Polaris RZR XP 4 900: 2012-2014
