Steering
SuperATV Polaris RZR Trail S 1000 RackBoss 2.0 Steering Rack and Pinion Steering Steering
Polaris RZR Trail S 1000 RackBoss 2.0 Steering Rack & Pinion
RackBoss 2.0 is in a league of its own. Every rack eventually wears out, becomes sloppy, and makes your steering and responsiveness seem like crap. Or at least all racks did until RackBoss 2.0. This changes all that because it's the only rack on the market that uses X24 Tech, our unique dual-ring design that reduces wear by over 50% compared to stock. With SuperATV's RackBoss 2.0 rack and pinion installed on your Polaris RZR Trail S 1000, you can run huge tires and tackle deadly terrain. You can ride the way you want every day for years and stop worrying about your rack. Less wear thanks to our double ring design. What makes RackBoss 2.0 so effective in preventing falls? It is designed with X24 Tech, heavy-duty PTFE bushings on both ends of the rack that eliminate play from internal components. Reducing backlash also maintains the springof almost motionless tension. With little to no unintended internal movement, this rack can spin massive tires during intense rides and hard hits while remaining like new for years longer than the next best rack. And with the built-in grease fitting, Gravely UTV Parts, you can push fresh grease after getting deep into mud or water. Solid Steel Bar Steering Stems Solid steel bar steering stems give you the rugged strength you need to ride over rough terrain. They're great for spinning big tires up hills and navigating boulder fields. The 1" diameter steel rod is paired with heavy-duty tie rod ends: 3/4" outer tie rods and rebuildable inner tie rods that use 3/4" rod threads and 16mm rack threads . All this strength hurts youlets you go wild. Stamped Tube Steering Stems These pressed steel tube steering stems are lightweight but super strong. The flared and crimped design increases the strength of the 7/8" diameter tube. They are also reinforced with better tie rod ends. They have huge 16mm rack threads and 14mm rod threads , making them the toughest in the industry They'll keep you on track where others fail. Looking for a more traditional rack? If you don't need all the benefits of a RackBoss? 2.0, Massimo 500 UTV Parts Diagram, 6 Passenger UTV, you can call it back to our original and more traditional RackBoss 1.0 It uses the same heavy duty housing but does not include the additional PTFE bushing Our RackBoss 1.0 rack and pinion is. comes with stamped steel tubes that are stronger than stock and perfect for used cyclistsonals looking for an upgrade. It's finished with our heavy-duty 14mm inner and outer tie rod ends so you can ride harder without worry. Patent #11,345, polaris utv parts, 393| RackBoss 1.0 Stamped Steering Stem | RackBoss 2.0 stamped steering stem | RackBoss 2.0 stamped solid steel steering stem | |
| Price | $349.95 | $399.95 | $499.95 |
| X24 Tech Dual -Bushing Design | ✔ | ✔ | |
| Tie rod material | Steel tube | Steel tube | Solid steel bar |
| Inner ball and socket thread diameter | 14mm | 14mm rod threads, speed utv parts, 1616mm rack threads | 3/4" rod threads, yardsport utv parts, threads 16 mm rack/tr> |
| Outer Tie Rod End Thread Diameter | 14mm | 14mm | 3/4 " |
| Greasable | ✔ | ✔ | |
| Inner boots | ✔ | ✔ | ✔ |
| Steering stop kit | ✔ | ✔ | ✔ |
| Misalignment bushings, tie rod studs, utv bass accessories pro and hardware | ✔ | ✔ | ✔ |
WARNING: This product may impact the operation of the machine. The customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, UTV parts manufacturer, UTV accessories near. home, properly installed and understands any impact this product has or may have on the operation of the machine.⚠ California Proposition 65 Warning ⚠ WARNING: This product may contenir a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Features:
- Bings heavy-duty double PTFE:
- Designed with X24 technology
- Prevents wear
- Reduces slope
- Improves the overall durability
- Use of solid steel tie rods:
- 3/ 4" outer tie rod ends
- Tie rod ends Rebuildable inner tie rods that use 3/4" rod threads and 16mm rack threads
- Using crimped tube tie rods:
- 14mm outer tie rod ends
- Rebuildable inner tie rod ends using 14mm rod threads and 16mm rack threads
- 65% Larger case than originaline
- Over 50% less wear than OEM after 15 Used UTV Parts on eBay, 000 cycles
- Rack Gear Lubricator
- Polaris RZR Trail S 1000 Premium: 2021+
- Polaris RZR Trail S 1000 Ultimate: 2021+
Replaces OEM references: 1824349 and 1823994
INSTALLATIONInstructions
1-44-F-0-DT#RZR1 Make_Polaris, Model_RZR S 1000 Style:Steel Swaged Tube,Solid Steel Bar4.80 (468 reviews)
