VIAIR Escapade constant duty compact onboard air system Tools

Tools

VIAIR Escapade constant duty compact onboard air system Tools Tools

Escapade Constant Duty Compact Onboard Air System

yamaha utv parts and accessories, alberta used utv parts, new utv-mx 2000 parts,

The Escapade Constant Duty Compact on-board air system from VIAIR is a solution for Compact, pre-packaged compressed air pump that includes a state-of-the-art 450C compressor, rated at 150 PSI, 100% heavy-duty, Realtree XD UTV replacement parts, extruded aluminum tank, UTV diesel parts and all components needed to install a system functional capable of inflating the tires and operating the air locker. This OBA system comes complete with an integrated pressure switch, automatic coupler and tire inflation kit. 

Additional information download:

Manual dimensional drawing wiring diagram

FEATURES
– VIAI compressorR 450C 150 PSI with thermal overload protector (1)
– Extruded aluminum air tank (1)
– Sealed Pressure Switch (110 PSI On, Dragonfire UTV Parts, UTV Accessories for Defender, 145 PSI Off) (Pre-Installed) (1)
– 40A 4-pin sealed relay with pre-wired socket (1)
– 40A sealed relay 4-Pin Pin Relay with Pre-Wired Female Socket (1) – Tire Inflator Gun with 160 PSI Gauge (1) td>
– 30 feet. Spiral hose with quick connector and stud (1)
– Rubber tip blow gun (1)
– Quick connect coupler (pre-installed) (1)
– 1/4″ 175 PSI safety valve (pre-installed) (1)
– 1/4″ NPT plug kit (foruninstalled) (1)
– 1/8″ drain valve (preinstalled) (1)
– 1/4″ NPT to 1/8″ BSP Adapters (2)
– Air Filter Housing with Elements of replacement air filters (1)
– 20 feet. 12 Gauge Freeze Resistant Wire with In-Line Fuse Holder (1)

SPECIFICATIONS
– 12 volts
– Permanent magnetic motor
– Service Cycle: 100% at 100 PSI
– Max. Working Pressure: 150 PSI
– Max. Amp consumption: 23 A
– Protection rating: IP67
– Dimensions: 9.38″L x 4″W x 6.75″H
– Net weight: 12.5 lbs
–
–
–
–
–
–
–

Please note: Use thread sealant for proper installation. Threaded tape is not recommended. Properly sealed, bighorn utv parts, wholesale utv parts, recommended torque for 1/8" is 10~11 ft-lbs. Recommended torque for 1/4" and 3/8" is 16~18 ft-lbs .

---

PERFORMANCE DATA

PSI	CFM	A	BAR	LPM	A
0	1.80	12	0	51.0	12
10	1.75	14	1.0	47.6	15
20	1, 60	16	2.0	43.3	17
30	1.52	17	3.0	38.2	18
40	1.39	18	4.0	34.0	19
50	1.27	19	5.0	30.5	20
60	1.18	19	6.0	28.1	21
70	1.09	20	7.0	26.4	22
80	1.04	20	8.0	25.0	23
90	0.97	21	9.0	23.0	22
100	0.94	22	10.0	21, 0	21
110	0.90	23
120	0.86	23
130	0.81	22
140	0, 76	21
150	0.72	20

* Supply voltage: 13,8 Volts

FILL RATE

31″ "col" style= "text-align: center;">FILL RATE
0 to 30 PSI	4 min 05 sec. (±10 sec.)
15 to 30 PSI	2 min. 10 sec. (±05 sec.)
33″>
0 to 30 PSI	5 min 30 sec. (±15 sec.)
15 to 30 PSI	2 min. 50 sec. (±05 sec.)
35″
0 to 30 PSI	6 min 55 s (± 15 s .)
15 to 30 PSI	3 min 30 sec (± 10 sec.)
37″ scope="col" style="text-align: center;">FILL RATE
0 to 30 PSI	7 min. 56 sec. (± 15 sec.)
15 to 30 PSI	4 min. 09 s. (± 10 sec.)

VEHICLE FITMENT

Universal

, parts jc utv motorsport SEI-LEDZ4WHP2 Make_Arctic Cat, Make_Can Am, Make_Honda, Make_Kawasaki, Make_Polaris, Make_Segway, Make_Yamaha, Model_Commander, Model_Defender, Model_General, Model_Maverick, Model_Maverick R, Model_Mule, Model_Pioneer, Model_Ranger 1000, Model_Ranger 570, Model_Ranger 700, Model_Ranger 800, Model_Ranger 900, Model_Ranger XD 1500, Model_Ranger XP !000, Model_Rhino, Model_Ridge, Model_RZR 170, Model_RZR 200, Model_RZR 570, Model_RZR 800, Model_RZR 900, Model_RZR PRO R, Model_RZR PRO XP, Model_RZR RS1, Model_RZR S 1000, Model_RZR S 900, Model_RZR Turbo R, Model_RZR Turbo S, Model_RZR XP, Model_RZR XP 1000, Model_RZR XP 900, Model_RZR XP Turbo, Model_Super Villain, Model_Talon, Model_Teryx, Model_Teryx KRX 1000, Model_UT10, Model_Viking, Model_Villain, Model_Wildcat, Model_Wildcat XX, Model_Wolverine, Model_X3, Model_Xpedition, Model_YXZ4.61 (376 reviews)