Switches
XTC Power Products Can Am Maverick R/X3 6-Switch Power Control System Switches Switches
Can Am Maverick R / X3 6 Switch Power Control System
UTV accessory financing, XTC Power Products is leading the way in UTV wiring. Powering multiple accessories has become easier than ever with our Plug and Play PCS (Power Control System) for the Can-Am Maverick X3. Unlike other available switch systems, UTV parts and accessories, the Power Control System is designed with the installer in mind. Each PCS has a vehicle-specific power connector and rocker switch harness that fits the factory pre-cut rocker switch positions.Power Delivered
The PCS includes 1 x 30A circuit and 3 x 20A high current circuits. on relay with Diode protection. The design reduces voltage spikes due to field collapse, protecting LED lights and other sensitive accessories. There are also 2 x 10 amp direct wire circuits provided for low power accessoriesion like rock lamps or whip lamps. A fuse block that protects the circuits is also included and comes with an eight-gauge power cable and fuses. Most UTV charging systems produce between 40 and 70 amps. Because from this, a 50 amp circuit breaker at the battery safely powers the PCS. Installing a high power switching system over 100 amps is not practical in a UTV.
The barrier strip of power control systems
The Professional wiring installers use barrier strips in off-road vehicle constructions. for years. Some good reasons would be aesthetics, as well as ease of use when adding new connections and troubleshooting later. Each screw point on the barrier strip has a different colored wire that matches the wires in the fuse box harness andswitches. Therefore, the first rocker switch would be the large gray 30 amp wire, Honda Pioneer 700 UTV Accessories, UTV Description, and so on.
Can Switch System Power Harness Configurations- Am Maverick center console between driver and passenger. Additionally, palazzo auto parts, utv parts guy discount code, two toggle switches mounted on the center dash and a final switch that can be mounted next to the steering wheel or the center dash. Additionally, toggle switches can also be installed together in any custom manner deemed appropriate by the installer. Additionally, a Molex connector connects the switching harness to the power control system principal.
Modular power connection
The PCS-64-MAV-NS has a modular power connector at the fuse box. which plugs in line with the vehicle's ignition power. Therefore, the bottom LED (available on custom rocker switches) will only illuminate when the ignition key is turned on. The top light only turns on when the toggle switch is pressed. It should be noted that the wiring system will work with or without the vehicle's ignition. XTC Power products, made in America and Wired For Fun®!
Features:
- Easy installation Plug and Play
- 1 x 30 AMP,rad UTV Parts Reviews, 3 x 20 AMP High Power Relayed
- and 2 x 10 Amp Direct Switch Circuits
- Fuse Block with Blown Fuse LED Indicator
- Each switch on an individual fuse
- 8GA power cable Main circuit 50 A Disjunctor on the battery
- Barrier strip for clean integration
- Low row lighting when enhanced switches are used
- 6 switch system – Switches in option
- Made in the USA!
- Can Am Maverick R
- Can Am Maverick X3
