Lighting
XTC Power Products Polaris General / Ranger Plug & Play Turn Signal System with Horn Lighting Lighting
Polaris General / Ranger Plug & Play Turn Signal System with Horn
Kubota UTV Parts Online,XTC Power Products is leading the way in UTV wiring. Installing turn signals on a UTV is easier than ever with our Plug and Play Turn Signal System for the Polaris General/Ranger with Polaris Pulse Bus Bar. The TSS (Turn Signal System) consists of a relay and horn control box that mounts under the hood and turn signal, as well as custom hazard/horn switches that mount in the dash. A supplied vehicle-specific tail harness integrates with OEM Polaris Rangers tail lights to convert them to turn signals. *2019+ Polaris Rangers WITHOUT factory installed drive control have 4 pin rear harnesses that power the tail lights, they use part # TSS-POL-GBU. Polaris Rangers WITH factory-installed Ride Command have 8-pin rear harnesses that power the taillights AND backup cameraFactory odes 800cc dominator utv parts, which use this pt# TSS-POL-RCBU.
How TSS Works
All TSS part numbers include a toggle switch marine.tch quality rocker with laser cut directional arrows that flash red when activated. When you press the turn signal toggle switch, the TSS will activate the turn signal, returning the switch to the center position cancels the turn signal. Each TSS has a vehicle-specific harness that plugs in-line with the factory taillight harness. The brake light signal goes through the TSS. As a result, the opposite brake light still functions normally while the activated turn signal brake light flashes.
Also included
Also included in our Plug and Play Polaris General /Ranger Turn Signal Kit is a "Danger/Horn" toggle switch. Pressing the top "Danger" side of the actuator will turn on the dash lights.e distress, the UTV parts manufacturer, returning the switch to the center position will deactivate them. Additionally, pressing the bottom of the custom toggle switch will activate the included street legal FIAMM horn. A front harness is provided that includes two Maxximde 3/4″ amber LED lights that mount in each corner by drilling a whole. Additional lights and splitter are sold separately for those looking to expand their setup.
Convenient with Polaris Plug and Play General/Ranger TSS Turn Signal Kit
Unlike our competitors , all TSS kits include an auxiliary power output for a license plate light or whip lights. Additionally, the auxiliary power supply is ideal for powering our 6 inch LED illuminated license plate frame. Above all, UTV aftermarket parts, 2002 Polaris UTV parts, Camso UTV track parts, every systeme comes with a vehicle-specific power connection. Without a doubt, it is easy to install, with no wires to cut or crimp. Everything needed to integrate with your vehicle's OEM brake light harness included. Unplug the tail light harness, plug in ours, camso utv 4s1 trail parts and enjoy. XTC Power Products, Made in America and Wired For Fun®!
If you own a Polaris Ranger XP WITHOUT the Polaris Pulse busbar, use part number TSS-RAN900
If you have a 2016-2018 Polaris General, Yanmar UTV parts, use TSS-POL-GEN
Features:- Easy installation Plug and Play
- Fits new Polaris body styles 2018-later Ranger XP 1000 and 2019 General Models
- 2- and 4-seat models (models without drive control or with non-factory-installed winch by Northstar)
- Connects to Polaris OEM pulse bus bar for powertion
- Plug into OEM brake light harness, using factory tail lights
- Laser etched LED turn signal switch
- Switch Emergency Hazard Warning Light
- Rear power output for optional license plate light
- Automotive horn
- Made in the USA -United!
- Polaris General (2019+)
- Polaris Ranger XP 1000
Instructions
K37-4735-0 discountable, Make_Polaris, Model_General, Model_Ranger 1000, Model_Ranger XP !0004.93 (331 reviews)
